next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Policy Document

DIRECTIVE 2009/28/EC

Policy Document
Topics:
DIRECTIVE 2009/28/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 23 April 2009 on the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC

Related content

Related indicators

Indicator Specification Share of energy consumption from renewable sources in Europe This indicator measures the EU’s progress towards achieving its 2020 and 2030 renewable energy targets. Gross final renewable energy consumption is the amount of renewable energy consumed for electricity, heating and cooling, and transport in the 27 EU Member States using actual and normalised hydropower and wind power generation, and is expressed as a share of gross final energy consumption. The Renewable Energy Directive (2009/28/EC) defines gross final energy consumption as the energy commodities delivered for energy purposes to final consumers (industry, transport, households, services, agriculture, forestry and fisheries), including the consumption of electricity and heat by the energy branch for electricity and heat production, and including losses of electricity and heat in transmission and distribution. Figure 1 shows consumption of energy from renewable sources (including only certified biofuels complying with the Renewable Energy Directive (RED) sustainability criteria) as a proportion of gross final energy consumption, the indicative RED trajectory towards the 2020 target, the indicative 2020 target and the 2030 target. It should be noted that the official 2020 targets refer to the EU-27 plus the United Kingdom and to individual Member States. The same target 20% target has been used for the EU-27 in this indicator. Figure 2  shows the share of renewable energy in gross final energy consumption by country. It illustrates the progress made by the EU and its Member States with respect to their binding renewable energy targets for 2020 . For more information, please refer to the EEA's  annual T rends and projections in Europe and Renewable energy in Europe  reports.  
Indicator Specification
Archived
Share of energy consumption from renewable sources in Europe This indicator measures the EU’s progress towards achieving its 2020 and 2030 renewable energy targets. Gross final renewable energy consumption is the amount of renewable energy consumed for electricity, heating and cooling, and transport in the 27 EU Member States using actual and normalised hydropower and wind power generation, and is expressed as a share of gross final energy consumption. The Renewable Energy Directive (2009/28/EC) defines gross final energy consumption as the energy commodities delivered for energy purposes to final consumers (industry, transport, households, services, agriculture, forestry and fisheries), including the consumption of electricity and heat by the energy branch for electricity and heat production, and including losses of electricity and heat in transmission and distribution. Figure 1 shows consumption of energy from renewable sources (including only certified biofuels complying with the Renewable Energy Directive (RED) sustainability criteria) as a proportion of gross final energy consumption, the indicative RED trajectory towards the 2020 target, the indicative 2020 target and the 2030 target. It should be noted that the official 2020 targets refer to the EU-27 plus the United Kingdom and to individual Member States. The same target 20 % target has been used for the EU-27 in this indicator. For more information, please refer to the annual EEA's, T rends and projections in Europe and Renewable energy in Europe  reports.   Figure 2 shows the consumption of energy from renewable sources as a proportion of gross final energy consumption by country. It illustrates the progress made by the EU, its Member States and other EEA member countries with respect to their binding renewable energy targets for 2020.
Indicator Specification Use of renewable energy for transport in Europe This indicator shows the percentage of energy consumed in the transport sector that comes from renewable energy sources. Values are tracked at the EU and country levels. The indicator is based on Eurostat data and approximated values calculated by the EEA for the latest year.
Indicator Specification
Archived
Energy intensity Energy intensity is the ratio between gross inland energy consumption (GIEC) and gross domestic product (GDP), calculated for a calendar year. GIEC is calculated as the sum of the gross inland consumption of the five sources of energy: solid fuels, oil, gas, nuclear and renewable sources. To monitor trends, GDP is in constant prices to avoid the impact of inflation, with a base year of 2010.
Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind, hydro, biomass and waste, solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based on the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Share of renewable energy in gross final energy consumption in Europe Gross final renewable energy consumption is the amount of renewable energy consumed for electricity, heating and cooling, and transport in the EU Member States using actual and normalised hydropower and wind power generation  [1] , and expressed as the share of gross final energy consumption. The indicator was developed to measure the EU's progress towards achieving the 2020 and 2030 objectives on renewable energy. RED ( Directive 2009/28/EC)  commits the EU to reaching a 20 % share of renewable energy in gross final energy consumption  [2]  by 2020, and a 10 % share of RES-T by the same year.   It sets binding national targets for renewable energy consumption by 2020 and prescribes minimum indicative trajectories  for each country in the run-up to 2020 to ensure that national 2020 targets will be met. In addition, the directive requires Member States to adopt and publish NREAPs that outline the expected trajectories for their national shares of RES for the years from 2010 to 2020. Countries submitted their NREAPs in 2010. They have an obligation to report biennially on national progress towards indicative RED and expected NREAP targets. Europe 2020: the EU’s 10-year growth strategy reaffirms the importance of the renewable energy sector for Europe. The target of a 20 % share of renewable energy in gross final consumption is one of the three headline targets for climate and sustainable energy under this strategy. The other EU-wide targets are the achievement of a 20 % reduction in the EU's greenhouse gas emissions compared with 1990 and a 20 % decrease in the EU's primary energy consumption compared with projections, both by 2020. Together, these represent the EU's triple 20/20/20 objectives for climate and energy in the run-up to 2020. They are implemented through the EU's 2009 climate and energy package and the 2012 Energy Efficiency Directive (EED). For 2030, the EU and its Member States have endorsed the following three EU-wide targets: achieving a binding minimum 40 % domestic reduction in greenhouse gas emissions compared with 1990; achieving a binding minimum 32 % share of renewable energy consumption; achieving an indicative minimum 32.5 % improvement in energy efficiency.  [1] In accordance with accounting rules under Directive 2009/28/EC, electricity generation from hydropower and wind power needs to be normalised to smooth the effects of annual variations (based on the 15-year average for hydropower and the 5-year average for wind power). [2] Gross final energy consumption refers to the energy commodities delivered for energy purposes to industry, transport, households, services including public services, agriculture, forestry and fisheries, including the consumption of electricity and heat by the energy branch for electricity and heat production, and including losses of electricity and heat in distribution and transmission (cf. Article 2f of Directive 2009/28/EC). With this, it excludes transformation losses, which are included in gross inland energy consumption. In calculating a Member State's gross final energy consumption for the purpose of measuring its compliance with the targets and interim RED and NREAP trajectories, the amount of energy consumed in aviation will, as a proportion of that Member State's gross final consumption of energy, be considered to be no more than 6.18 % (4.12 % for Cyprus and Malta).
Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind. hydro. biomass and waste. solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Overview of the European energy system Energy efficiency of conventional thermal electricity production Output from conventional thermal power stations consists of gross electricity generation and any heat sold to third parties (combined heat and power plants) by both conventional thermal public utility power stations and autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables, industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste. Energy losses in transformation and distribution Numerator: The amount of energy loss is the sum of the the energy industry's own consumption, with distribution and transformation losses (the difference between transformation input and output).  Denominator: Numerator plus final energy available for final consumption in primary energy. EU-28 share of primary energy by fuel type and share of final energy consumption by sector Total energy consumption or gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total gross inland energy consumption calculated for a calendar year.
Indicator Specification
Archived
Energy intensity Energy intensity is the ratio between the gross inland consumption of energy and Gross Domestic Product (GDP) calculated for a calendar year. The Gross Inland Energy Consumption (GIEC) is calculated as the sum of the gross inland consumption of the five sources of energy: solid fuels, oil, gas, nuclear and renewable sources. To monitor trends, GDP is in constant prices to avoid the impact of inflation, base year 2005.
Indicator Specification
Archived
Overview of the European energy system Gross inland consumption is calculated as follows: primary production + recovered products + total imports + variations of stocks - total exports - bunkers. It corresponds to the addition of final consumption, distribution losses, transformation losses and statistical differences.
Indicator Specification
Archived
Primary energy consumption by fuel Primary energy consumption is defined as gross inland energy consumption minus the energy consumed for purposes other then producing useful energy (non-energy use). Gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total primary energy consumption calculated for a calendar year.
Indicator Specification
Archived
Renewable energy in gross inland energy consumption The share of renewable energy in gross inland consumption is the ratio between gross inland energy consumption from renewable sources and total gross inland energy consumption calculated for a calendar year, expressed as a percentage. Both renewable energy and gross inland energy consumption are measured in thousand tonnes of oil equivalent (ktoe). Renewable energy sources are defined as renewable non-fossil sources: wind, solar, geothermal, wave, tidal, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases.
Indicator Specification
Archived
Share of renewable energy in gross final energy consumption Gross Final Renewable Energy Consumption is the amount of renewable energy consumed for electricity, heating and cooling, and transport in the Member States with actual and normalised hydro and wind power generation [1]  and expressed as a share against gross final energy consumption. The indicator is developed for measuring the contribution to the 2020 and 2030 objectives on renewable energy for the EU.   The Renewable Energy Directive (RED) [2]  commits the Union to reaching a 20% share of renewable energy in gross final energy consumption [3]  by 2020 and a 10% share of renewable energy consumed in transport by the same year.   It sets binding national targets for renewable energy consumption by 2020 and it prescribes for each country minimum indicative trajectories in the run-up to 2020 to ensure that national 2020 targets will be met. In addition, the Directive requires Member States to adopt and publish National Renewable Energy Action Plans (NREAPs) that outline the expected trajectories for the national share of RES for the years starting with 2010 and until 2020. Countries have submitted their NREAPs in 2010. They have the obligation to report biennially on national progress towards indicative RED and expected NREAP targets.   Europe 2020– the European Union’s ten-year growth strategy reaffirms the importance of the renewable energy sector for Europe. The 20 % renewable energy share in gross final consumption is one of the three headline targets for climate and sustainable energy under the strategy. The other EU-wide targets are achieving a 20 % reduction of the EU’s GHG emissions compared to 1990 and achieving a 20 % saving of the EU’s primary energy consumption compared to projections, both by 2020. Together, these represent the Union’s triple 20/20/20 objectives for climate and energy in the run-up to 2020. They are implemented through the EU’s 2009 climate and energy package and the 2012 Energy Efficiency Directive (EED).   For 2030, EU leaders endorsed the following three EU-wide targets: (i)            achieving a binding minimum 40 % domestic reduction of greenhouse gas emissions compared to 1990; (ii)           achieving a binding minimum 27 % share of renewable energy consumption; and (iii)          achieving an indicative minimum 27 % improvement in energy efficiency.  [1] In accordance with accounting rules under Directive 2009/28/EC, electricity from hydro and wind needs to be normalised to smooth the effects of annual variations (hydro 15 years and wind 5 years). [2] Directive 2009/28/EC [3] Gross final energy consumption means the energy commodities delivered for energy purposes to industry, transport, households, services including public services, agriculture, forestry and fisheries, including the consumption of electricity and heat by the energy branch for electricity and heat production and including losses of electricity and heat in distribution and transmission (cf. Art. 2f of Directive 2009/28/EC). With this, it excludes transformation losses which are included in gross inland energy consumption. In calculating a Member State's gross final energy consumption for the purpose of measuring its compliance with the targets and interim RED and NREAP trajectories, the amount of energy consumed in aviation shall, as a proportion of that Member State's gross final consumption of energy, be considered to be no more than 6.18% (4.12% for Cyprus and Malta).
Indicator Specification
Archived
Final energy consumption by sector Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, services and agriculture. The indicator can be presented in relative or absolute terms. The relative contribution of a specific sector is measured by the ratio between the final energy consumption of that sector and total final energy consumption calculated for a calendar year. It is a useful indicator which highlights a country's sectoral needs in terms of final energy demand.
Indicator Specification
Archived
Renewable energy in gross inland energy consumption The share of renewable energy consumption is the ratio between gross inland energy consumption from renewable sources (TOE) and total gross inland energy consumption (TOE) calculated for a calendar year, expressed as a percentage. Both renewable energy and total energy consumption are measured in thousand tonnes of oil equivalent (ktoe). Renewable energy sources are defined as renewable non-fossil sources: wind, solar, geothermal, wave, tidal, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases.
Indicator Specification
Archived
Overview of the European energy system Energy flows in European Union The Sankey diagram (Fig.1) shows the energy conversion from primary energy (coal, oil, natural gas, etc) to secondary energy commodities such as heat, electricity and manufactured fuels, through transformation plants (power stations, district heating, CHPs, oil refineries and other transformation plants) and the associated conversion losses. The right hand side of the diagram shows the final mix of energy consumption by different EU27 energy users (including: industry, transport, domestic, other final consumers and non-energy use). Note that renewables in transport for ENER 36 include all biofuels whether sustainable or not. Only a proportion of the primary energy entering the energy system of a country flows through to the end user for consumption.  There are various diversions and losses incurred before energy reaches the final consumer due to distribution losses and use in the energy sector. The Sankey diagram is useful in capturing the situation in a certain year but other indicators are needed to show the change in energy use over time. Energy efficiency of conventional thermal electricity and heat production Output from conventional thermal stations consists of gross electricity generation and also of any heat sold to third parties (combined heat and power plants) by conventional thermal public utility power stations as well as autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as a fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste. Units: Fuel input and electrical and heat output are measured in thousand tonnes of oil equivalent (ktoe). Efficiency is measured as the ratio of fuel output to input (%) Energy losses in transformation and distribution Numerator: Share of energy losses is the sum of own consumption of the energy industry, distribution losses and transformation losses (difference between transformation input and output). Denominator: Numerator plus final energy available for final consumption in primary energy. EU-27 Share of primary energy by fuel type and, share of final energy consumption by sector Total energy consumption or gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total gross inland energy consumption calculated for a calendar year (Fig.2). Units: Energy consumption is measured in thousand tonnes of oil equivalent (ktoe). The share of each fuel in total energy consumption is presented in the form of a percentage. EU27 net energy imports of solid fuels, oil, and gas from outside the EU27 was calculated as follows: total imports by fuel minus the sum of imports by fuel from other EU Member States minus total exports (Fig.1)
Indicator Specification
Archived
Overview of the electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. The gross electricity generation at the plant level is defined as the electricity measured at the outlet of the main transformers. i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants utilising the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind. hydro. biomass and waste. solar PV and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses, it does not include own use by electricity producers or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households, services (including agriculture and other sectors).
Indicator Specification
Archived
Share of renewable energy in final energy consumption Final Renewable Energy Consumption is the amount of renewable energy consumed in the member states with actual and normalised hydro and wind power generation and the share in the total final energy consumption. The final renewable energy consumption is composed of renewable energy for heat, renewable energy for electricity and the use of biofuels in transport The indicator is developed for measuring the contribution to the 2020 objectives on renewable energy for the EU-27. The Directive 2009/28/EC establishes an overall EU binding target of a 20 % share of renewable energy sources in energy consumption, as well as binding national targets by 2020 in line with the overall target. The overall share of renewable energy in the final energy consumption [1] includes consumption of electricity and heat from renewable energy sources as well as biofuels consumption. [1] Final Renewable Energy Consumption is the amount of renewable energy consumed in the member states with actual and normalised 15-year hydro power generation and 4-year wind and the share in the total final energy consumption. Due to this constraints, normalized data are only available from 2004 to 2009.
Indicator Specification
Archived
Total Gross Inland Consumption by Fuel The structure of the energy mix in gross inland energy consumption provides an indication of the environmental pressures associated with energy consumption. The type and magnitude of the environmental impacts associated with energy consumption, such as resource depletion, greenhouse gas emissions, air pollutant emissions, water pollution, accumulation of radioactive waste, etc., strongly depend on the type and amount of fuel consumed as well as abatement technologies applied.
Indicator Specification
Archived
Efficiency of conventional thermal electricity generation Output from conventional thermal power stations consists of gross electricity generation and also of any heat sold to third parties (combined heat and power plants) by conventional thermal public utility power stations as well as autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as a fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Energy intensity Energy intensity is the ratio between the gross inland consumption of energy and Gross Domestic Product (GDP) calculated for a calendar year. The Gross Inland Energy Consumption (GIEC) is calculated as the sum of the gross inland consumption of the five sources of energy: solid fuels, oil, gas, nuclear and renewable sources. To monitor trends, GDP is in constant prices to avoid the impact of inflation, base year 2005.
Indicator Specification
Archived
Final energy consumption by sector Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, services and agriculture. The indicator can be presented in relative or absolute terms. The relative contribution of a specific sector is measured by the ratio between the final energy consumption of that sector and total final energy consumption calculated for a calendar year. It is a useful indicator which highlights a country's sectoral needs in terms of final energy demand.
Indicator Specification
Archived
Renewable electricity This indicator traces the  share of renewable electricity, expressed as  the ratio (%) between the electricity produced from renewable energy sources and gross national electricity consumption. It measures the contribution of electricity produced from renewable energy sources to the national gross electricity consumption. Renewable energy sources are defined as renewable non-fossil energy sources: wind, solar, geothermal, wave, tidal, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases. Electricity produced from renewable energy sources comprises the electricity generation from hydro plants (excluding that produced as a result of pumping storage systems), wind, solar, geothermal and electricity from biomass/wastes. Electricity from biomass/wastes comprises electricity generated from wood/wood wastes and the burning other of solid wastes of a renewable nature (straw, black liquor), municipal solid waste incineration, biogas (incl. landfill, sewage, farm gas) and liquid biofuels. Gross national electricity consumption comprises total gross national electricity generation from all fuels (including autoproduction), plus electricity imports, minus exports.
Indicator Specification
Archived
Final energy consumption by sector Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, services and agriculture. The indicator can be presented in relative or absolute terms. The relative contribution of a specific sector is measured by the ratio between the final energy consumption of that sector and total final energy consumption calculated for a calendar year. It is a useful indicator which highlights a country's sectoral needs in terms of final energy demand.
Indicator Specification
Archived
CO2 intensity of electricity and heat generation Annual emissions of CO 2 in UNFCCC reporting format (In Mt = million tonnes). For CO 2 only, the (national) totals do not include emissions from biomass burning or emissions or removals from land-use change and forestry (LULUCF – CFR 5). The energy sector (CFR 1) is responsible for energy-related emissions, such as those arising from fuel combustion activities and fugitive emissions from fuels. Fuel combustion activities include: energy industries, manufacturing industries and construction, transport, other sectors and other stationary or mobile emissions from fuel combustion. Fugitive emissions from fuels include: solid fuels and oil and natural gas.
Indicator Specification
Archived
Renewable gross final energy consumption Final Renewable Energy Consumption is the amount of renewable energy consumed in the member states with actual and normalised 15-year hydro power generation and 4-year wind and the share in the total final energy consumption. The final renewable energy consumption is composed of renewable energy for heat, renewable energy for electricity and the use of biofuels in transport. The electricity production of hydro power is calculated both as actual production and normalised production over a 15-year weighted average (4-year weighted average for wind). The indicator is developed for measuring the contribution to the 2020 objectives on renewable energy for the EU-27. The Directive 2009/28/EC establishes an overall EU binding target of a 20 % share of renewable energy sources in energy consumption, as well as binding national targets by 2020 in line with the overall target. The overall share of renewable energy in the final energy consumption [1] includes consumption of electricity and heat from renewable energy sources as well as biofuels consumption. [1] Final Renewable Energy Consumption is the amount of renewable energy consumed in the member states with actual and normalised 15-year hydro power generation and 4-year wind and the share in the total final energy consumption. Due to this constraints, normalized data are only available from 2004 to 2009.
Indicator Specification
Archived
Electricity production by fuel Total gross electricity generation covers gross electricity generation in all types of power plants. The gross electricity generation at the plant level is defined as the electricity measured at the outlet of the main transformers. i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants utilising the following fuels: coal and lignite. oil. nuclear. natural and derived gas. renewables (wind. hydro. biomass and waste. solar PV and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result.
Indicator Specification
Archived
Final energy consumption intensity   Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, and services and agriculture. Total final energy intensity is defined as total final energy consumption (consumption of transformed energy such as electricity, publicly supplied heat, refined oil products, coke, etc, and the direct use of primary fuels such as gas or renewables, e.g. solar heat or biomass) divided by gross domestic product (GDP) at constant 2000 prices. The GDP figures are taken at constant prices to avoid the impact of inflation, base year 2000. Household energy intensity is defined as household final energy consumption divided by population. Transport energy intensity is defined as transport final energy consumption divided by GDP at constant 2000 prices. Industry energy intensity is defined as industry final energy consumption divided by industry Gross Value Added at constant 2000 prices. This excludes final energy consumption and gross value added from construction.  Services energy intensity is defined as services final energy consumption divided by services Gross Value Added at constant 2000 prices. Value added of services is the sum of 3 value added : G_H_I : Wholesale and retail trade, repair of motor vehicles, motorcycles and personal and household goods; hotels and restaurants; transport, storage and communication, J_K - Financial intermediation; real estate, renting and business activities and L_TO_P - Public administration and defence, compulsory social security; education; health and social work; other community, social and personal service activities; private households with employed persons
Indicator Specification
Archived
Combined heat and power (CHP) The share of combined heat and power (CHP) electricity production is the ratio between the electricity produced from combined heat and power plants (based upon the consideration of individual units within the plants) and the gross electricity production calculated for a calendar year. The former is expressed as a percentage of the latter. It measures the contribution of electricity produced from CHP to total electricity production. However, there are several important qualifications as not all the electricity and (useful) heat produced in CHP plants can be considered CHP production. This is explained in section 6 of the metadata. It should also be noted that although the indicator focuses on CHP electricity the quantity of useful heat recovered is almost 2.5 times higher in energy terms.
Indicator Specification
Archived
Efficiency of conventional thermal electricity generation Output from conventional thermal power stations consists of gross electricity generation and also of any heat sold to third parties (combined heat and power plants) by conventional thermal public utility power stations as well as autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as a fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Final electricity consumption by sector Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses, it does not include own use by electricity producers or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households, services (including agriculture and other sectors).
Indicator Specification
Archived
Net Energy Import Dependency The fuel sources: solid fuels, oil and gas refer to Eurostat categories: Solid fuels: Hard coal & Derivatives 2100 (sub categories used: Hard Coal 2111, Patent Fuels 2112, Hard Coke 2121) and Lignite & Derivaties 2200 (sub categories used: Brown Coal (Lignite) 2212, Brown Coal Coke 2220, Brown Coal Briquettes 2230 and Peat 2310). Data for other solid fuels sub categories is not available. Oil: Crude Oil & Feedstocks 3100 and All Petroleum Products 3200 (this includes LPG, refinery gas, motor spirit, kerosenes, naphtha, gas/diesel oil, residual fuel oil, white & industrial spirit, lubricants, bitumen, petroleum coke and other petroleum products) Gas: Natural Gas 4100. Data for other gas products is not available. EU27 net dependence on imports of solid fuels, oil, and gas as a percentage of Gross Inland Energy Consumption by country of origin. MS net (Extra-EU27) dependence on imports of the same products as a percentage of total GIEC, differentiated by intra-EU imports (from another Member State) and extra-EU imports from outside of the EU27. Estimated split of CO 2 emissions from imported fuel versus domestic fuel (for all fossil fuels). Geographical coverage: EU27 member states. No data available for Cyprus and Malta Temporal coverage: 2000-2008, Projections 2020 Data collected annually. Eurostat definitions for energy statistics http://circa.europa.eu/irc/dsis/coded/info/data/coded/en/Theme9.htm Eurostat metadata for energy statistics http://epp.eurostat.ec.europa.eu/cache/ITY_SDDS/EN/nrg_base.htm Official data (national total and sectoral emissions) reported to the United Nations Framework Convention on Climate Change (UNFCCC) and under the EU Monitoring Mechanism and EIONET. For the EU-27, these data are compiled by EEA in the European greenhouse gas inventory report: http://reports.eea.europa.eu/technical_report_2008_6/en
Indicator Specification
Archived
Energy efficiency in transformation EU-27 Share of primary energy by fuel type and, share of final energy consumption by sector and energy losses Share of energy losses, own consumption of the energy industry and final energy available for final consumption in primary energy, by Member State Structure in the efficiency of transformation and distribution of energy from primary energy consumption to final energy consumption, EU-27, 2009 Structure of CO 2 emissions from thermal power plants in EU-27, 2009 % share of input fuels into conventional thermal power plants Implied emission factors by fuel type – total fuel input by type to conventional thermal power plants (TJ) divided by CO 2 emissions from plants by fuel type Average efficiency for conventional thermal plant (total fuel inputs divided by total electricity and heat output) Share of CO 2 emissions by input fuel type. CO 2 emission savings per year for EU-27 at different transformation efficiencies compared to current 2009 efficiency
Indicator Specification
Archived
Final energy consumption in Europe by mode of transport This indicator considers total energy consumption in transport in PJ from 1990 onwards. The transport modes included are bunkers (sea transport), air transport (domestic and international), inland navigation, rail transport and road transport.
Indicator Specification
Archived
Primary energy consumption by fuel Total energy consumption or gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total gross inland energy consumption calculated for a calendar year.
Indicator Specification
Archived
Renewable electricity consumption The share of renewable electricity is the ratio between the electricity produced from renewable energy sources and gross national electricity consumption, expressed as a percentage. It measures the contribution of electricity produced from renewable energy sources to the national gross electricity consumption. Renewable energy sources are defined as renewable non-fossil energy sources: wind, solar, geothermal, wave, tidal, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases. Electricity produced from renewable energy sources comprises the electricity generation from hydro plants (excluding that produced as a result of pumping storage systems), wind, solar, geothermal and electricity from biomass/wastes. Electricity from biomass/wastes comprises electricity generated from wood/wood wastes and the burning other of solid wastes of a renewable nature (straw, black liquor), municipal solid waste incineration, biogas (incl. landfill, sewage, farm gas) and liquid biofuels. Gross national electricity consumption comprises total gross national electricity generation from all fuels (including autoproduction), plus electricity imports, minus exports. Projections are for 2020-2030 from the POLES (IPTS) Baseline and GHG Reduction Scenario, from the WEO 2009 (IEA) Reference and Alternative Policy Scenario (450) and PRIMES (EC) baseline and reference scenarios.
Indicator Specification
Archived
Renewable primary energy consumption The share of renewable energy consumption is the ratio between gross inland energy consumption from renewable sources (TOE) and total gross inland energy consumption (TOE) calculated for a calendar year, expressed as a percentage. Both renewable energy and total energy consumption are measured in thousand tonnes of oil equivalent (ktoe). Renewable energy sources are defined as renewable non-fossil sources: wind, solar, geothermal, wave, tidal, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases. Projections are for 2020-2030 from the POLES (IPTS) Baseline and GHG Reduction Scenario (Mitigation), from PRIMES 2009 Baseline and Reference scenarios and from the WEO 2009 (IEA) Reference and 450 Scenario
Indicator Specification
Archived
Total primary energy intensity Total energy intensity is the ratio between the gross inland consumption of energy (or total energy consumption) and Gross Domestic Product (GDP) calculated for a calendar year. The gross inland consumption of energy is calculated as the sum of the gross inland consumption of the five sources of energy: solid fuels, oil, gas, nuclear and renewable sources. To monitor trends, GDP is in constant prices to avoid the impact of inflation, base year 2000.  Units: Gross inland energy consumption is measured in 1000 tonnes of oil equivalent (ktoe) and GDP in million Euro at 2000 market prices. To make comparisons of trends across countries more meaningful, the indicator is presented as an index. For country comparisons, two additional columns are included to show the actual energy intensity in GDP in purchasing power standards for the latest available year, and also the energy intensity in terms of consumption per capita.
Indicator Specification
Archived
Final energy consumption by sector Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, services and agriculture. The indicator can be presented in relative or absolute terms. The relative contribution of a specific sector is measured by the ratio between the final energy consumption of that sector and total final energy consumption calculated for a calendar year. It is a useful indicator which highlights a country's sectoral needs in terms of final energy demand.
Indicator Specification
Archived
Use of renewable fuels in transport in Europe A ratio is used to determine the share of renewable energy  in transport consumption (RES-T) of  a Member State.  Article 3 (4) of the RES Directive  defines this ratio. The denominator of the ratio is the total amount of energy consumed in transport. This is calculated using only petrol, diesel, biofuels consumed in road and rail transport, and electricity. The numerator of the ratio is the amount of energy from renewable sources consumed in transport. All types of energy from renewable sources consumed in all forms of transport are considered. To calculate the numerator and the denominator of the share of RES-T, the amount of electricity produced from renewable sources and consumed in all types of electric vehicle is used. Member States may use either the average share of electricity from renewable sources in the Community, or the share of electricity from renewable energy sources in their own country, measured 2 years before the year in question. Furthermore, to calculate the amount of electricity from renewable energy sources consumed by electric road vehicles, a figure for consumption of 2.5 times the energy content of the electricity input from renewable sources is used.

Permalinks

Geographic coverage

For references, please go to https://www.eea.europa.eu/policy-documents/2009-28-ec or scan the QR code.

PDF generated on 08 Jul 2025, 04:38 AM

EEA Page URL QR

Topics

Topics:

Tags

Filed under:
Filed under: energy
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login