next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Policy Document

Directive 2001/80/EC, large combustion plants

Policy Document
Topics:
Directive 2001/80/EC of the European Parliament and of the Council of 23 October 2001 on the limitation of emissions of certain pollutants into the air from large combustion plants

Related content

Related indicators

Indicator Specification
Archived
Greenhouse gas emission intensity of electricity generation in Europe Greenhouse gas emission intensity is calculated as the ratio of CO 2 equivalent emissions from electricity generation and gross electricity generation.
Indicator Specification
Archived
Emissions of air pollutants from large combustion plants in Europe This indicator tracks trends since 2004 in emissions of SO 2 , NO x  and dust, as well as the environmental performance of LCPs. LCPs comprise combustion plants with a total rated thermal input equal to or greater than 50 MW.   The geographical coverage comprises the 28 EU Member States (EU-28) (Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom).   The temporal coverage is 2004-2017 (most recent year with officially reported LCP emissions and fuel use; obtained from the EEA LCP database v5.2 — see  Data sources ).
Indicator Specification
Archived
Large combustion plants operating in Europe This indicator provides a profile of the number of LCPs operating in Europe, their installed capacity and the mix of fuels they use. It is based on data from 2004 onwards. The geographical coverage comprises the EU-28 countries (Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom). In 2019, Luxembourg did not report any data for 2017. Only one facility was declared the previous year. In the period 2004-2015, LCPs were covered by Directive 2001/80/EC, while in 2016 LCPs were subject to reporting in accordance with Directive 2010/75/EU. The scope of this latter directive is slightly wider and thus covers plants that were not subject to reporting before 2015. The temporal coverage is the period 2004-2017 (latest dataset:  LCP_database_v5.2 ).
Indicator Specification
Archived
Large combustion plants operating in Europe This indicator provides a profile of the number of LCPs operating in Europe, their installed capacity and the mix of fuels they use. It is based on data from 2004 onwards. The geographical coverage comprises the EU-28 countries (Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom). In the period 2004-2015, LCPs were covered by Directive 2001/80/EC, while in 2016 LCPs were subject to reporting in accordance with Directive 2010/75/EU. The scope of this latter directive is slightly wider and thus covers plants that were not subject to reporting before 2015. The temporal coverage is the period 2004-2016 (the most recent year with officially reported emissions;  LCP_database_v4.2 ).
Indicator Specification Emissions of air pollutants from large combustion plants This indicator tracks trends since 2004 in emissions of SO 2 , NO x  and dust, as well as the environmental performance of LCPs. LCPs comprise combustion plants with a total rated thermal input equal to or greater than 50 MW. The geographical coverage comprises the EU-28 Member States (Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom). The temporal coverage is 2004-2015 (most recent year with officially reported LCP emissions and fuel use; EEA LCP database v1.0 (see Data sources ))
Indicator Specification
Archived
Large combustion plants operating in Europe This indicator provides a profile of the number of LCPs operating in Europe, their installed capacity and the mix of fuels they use. It is based on data from 2004 onwards. The geographical coverage comprises the EU-28 countries (Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom). The temporal coverage is 2004-2016 (the most recent year with officially reported emissions; EEA, 2018a).
Indicator Specification
Archived
Overview of the European energy system Energy efficiency of conventional thermal electricity production Output from conventional thermal power stations consists of gross electricity generation and any heat sold to third parties (combined heat and power plants) by both conventional thermal public utility power stations and autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables, industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste. Energy losses in transformation and distribution Numerator: The amount of energy loss is the sum of the the energy industry's own consumption, with distribution and transformation losses (the difference between transformation input and output).  Denominator: Numerator plus final energy available for final consumption in primary energy. EU-28 share of primary energy by fuel type and share of final energy consumption by sector Total energy consumption or gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total gross inland energy consumption calculated for a calendar year.
Indicator Specification
Archived
Efficiency of conventional thermal electricity and heat production in Europe The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of transformation outputs from conventional thermal power stations (electricity and heat) to transformation inputs to conventional thermal power stations. It is expressed as a percentage.  The output from conventional thermal power stations consists of gross electricity generation, as well as any heat sold to third parties (combined heat and power plants) by conventional thermal public power stations (public or main activity), district heating, and autoproducer thermal power stations. Gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Public supply is defined as undertakings that generate electricity (and heat) for sale to third parties as their primary activity. They may be privately or publicly owned. Autoproducers are defined as undertakings that generate electricity, either wholly or partly for their own use, as an activity that supports their primary activity (e.g. industrial processes). Fuel inputs include solid fuels (coal, lignite and equivalents), oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Efficiency of conventional thermal electricity and heat production The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of transformation outputs from conventional thermal power stations ( electricity and heat) to transformation input to conventional thermal power stations (%).  The output from conventional thermal power stations consists of gross electricity generation and also of any heat sold to third parties (Combined heat and power plants) by conventional thermal public power stations (public or main activity), district heating, and autoproducer thermal power stations. The gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Public supply is defined as undertakings which generate electricity (and heat) for sale to third parties as their primary activity. They may be privately or publicly owned. Autoproducers are defined as undertakings which generate electricity wholly or partly for their use as an activity which supports their primary activity (e.g. industrial processes). Fuel inputs include solid fuels (i.e. coal, lignite and equivalents), oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Overview of the European energy system Gross inland consumption is calculated as follows: primary production + recovered products + total imports + variations of stocks - total exports - bunkers. It corresponds to the addition of final consumption, distribution losses, transformation losses and statistical differences.
Indicator Specification
Archived
Primary energy consumption by fuel Primary energy consumption is defined as gross inland energy consumption minus the energy consumed for purposes other then producing useful energy (non-energy use). Gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total primary energy consumption calculated for a calendar year.
Indicator Specification
Archived
Overview of the European energy system Energy flows in European Union The Sankey diagram (Fig.1) shows the energy conversion from primary energy (coal, oil, natural gas, etc) to secondary energy commodities such as heat, electricity and manufactured fuels, through transformation plants (power stations, district heating, CHPs, oil refineries and other transformation plants) and the associated conversion losses. The right hand side of the diagram shows the final mix of energy consumption by different EU27 energy users (including: industry, transport, domestic, other final consumers and non-energy use). Note that renewables in transport for ENER 36 include all biofuels whether sustainable or not. Only a proportion of the primary energy entering the energy system of a country flows through to the end user for consumption.  There are various diversions and losses incurred before energy reaches the final consumer due to distribution losses and use in the energy sector. The Sankey diagram is useful in capturing the situation in a certain year but other indicators are needed to show the change in energy use over time. Energy efficiency of conventional thermal electricity and heat production Output from conventional thermal stations consists of gross electricity generation and also of any heat sold to third parties (combined heat and power plants) by conventional thermal public utility power stations as well as autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as a fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste. Units: Fuel input and electrical and heat output are measured in thousand tonnes of oil equivalent (ktoe). Efficiency is measured as the ratio of fuel output to input (%) Energy losses in transformation and distribution Numerator: Share of energy losses is the sum of own consumption of the energy industry, distribution losses and transformation losses (difference between transformation input and output). Denominator: Numerator plus final energy available for final consumption in primary energy. EU-27 Share of primary energy by fuel type and, share of final energy consumption by sector Total energy consumption or gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total gross inland energy consumption calculated for a calendar year (Fig.2). Units: Energy consumption is measured in thousand tonnes of oil equivalent (ktoe). The share of each fuel in total energy consumption is presented in the form of a percentage. EU27 net energy imports of solid fuels, oil, and gas from outside the EU27 was calculated as follows: total imports by fuel minus the sum of imports by fuel from other EU Member States minus total exports (Fig.1)
Indicator Specification
Archived
Total Gross Inland Consumption by Fuel The structure of the energy mix in gross inland energy consumption provides an indication of the environmental pressures associated with energy consumption. The type and magnitude of the environmental impacts associated with energy consumption, such as resource depletion, greenhouse gas emissions, air pollutant emissions, water pollution, accumulation of radioactive waste, etc., strongly depend on the type and amount of fuel consumed as well as abatement technologies applied.
Indicator Specification
Archived
Efficiency of conventional thermal electricity generation Output from conventional thermal power stations consists of gross electricity generation and also of any heat sold to third parties (combined heat and power plants) by conventional thermal public utility power stations as well as autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as a fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Energy-related emissions of acidifying substances Emissions of SO 2 and NOx (also NH 3 where applicable) in 1000 tonnes.
Indicator Specification
Archived
CO2 intensity of heat and electricity generation Annual emissions of CO 2 in UNFCCC reporting format (In Mt = million tonnes). For CO 2 only, the (national) totals do not include emissions from biomass burning or emissions or removals from land-use change and forestry (LUCF). The energy sector is responsible for energy-related emissions, such as those arising from fuel combustion activities and fugitive emissions from fuels. Fuel combustion activities include: energy industries, manufacturing industries and construction, transport, other sectors and other stationary or mobile emissions from fuel combustion. Fugitive emissions from fuels include: solid fuels and oil and natural gas.  
Indicator Specification
Archived
Energy-related emissions of acidifying substances Emissions of SO 2 and NOx (also NH 3 where applicable) in 1000 tonnes.
Indicator Specification Emissions of air pollutants from transport This indicator is based on the assessment of emissions trends of CO, NO x , NMVOCs, SO x and primary particulates. 
Indicator Specification
Archived
Emission intensity of public conventional thermal power electricity and heat production Historical emissions of CO 2 , NOx and SO 2 from the reporting format category 1A1a - Public electricity and heat production. Output from public thermal power stations covers gross electricity generation and any heat also produced by public thermal power stations. Public thermal power stations generate electricity and/or heat for sale to third parties as their primary activity. They may be privately or publicly owned. The gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Emissions intensity is calculated by dividing the emissions of each pollutant from public electricity and heat production (sector 1A1a) by the output from public thermal power stations.  
Indicator Specification
Archived
Energy-related emissions of acidifying substances Emissions of combined SO2 and NOx (also NH3 where applicable) in 1000 tonnes acid equivalents. Gaps filled by EEA/ETC-ACC where necessary using simple interpolation techniques
Indicator Specification
Archived
Emissions from public electricity and heat production - explanatory indicators (ENER 009) Historical emissions of CO2, NOX and SO2 from the common reporting format category 1A1a Public electricity and heat production. Output from public thermal power stations covers gross electricity generation and any heat also produced by public thermal power stations. Public thermal power stations generate electricity and/or heat for sale to third parties, as their primary activity. They may be privately or publicly owned. The gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included.
Indicator Specification
Archived
Nitrogen oxides (NOx) emissions This indicator tracks trends since 1990 in anthropogenic emissions of nitrogen oxides. The indicator also provides information on emissions by sectors: energy production and distribution; energy use in industry; industrial processes; road transport; non-road transport; commercial, institutional and households; solvent and product use; agriculture; waste; other. Geographical coverage: EEA-32. The EEA-32 country grouping includes countries of the EU-27 (Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom) EFTA-4 (Iceland, Liechtenstein, Switzerland and Norway) and Turkey. Temporal coverage: 1990-2010
Indicator Specification Sulphur dioxide (SO2) emissions The indicator tracks trends since 1990 in anthropogenic emissions of sulphur dioxide. The indicator also provides information on emissions by sector: energy production and distribution; energy use in industry;, industrial processes; road transport; non-road transport; commercial, institutional and households; solvent and product use; agriculture; waste; other. Geographical coverage: EEA-32. The EEA-32 country grouping includes countries of the EU-27 (Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, and the United Kingdom) EFTA-4 (Iceland, Liechtenstein, Switzerland and Norway) and Turkey. Temporal coverage: 1990-2010
Indicator Specification Persistent organic pollutant emissions This indicator tracks trends in anthropogenic emissions of POPs since 1990. At the moment, emissions of PAHs are described, but emissions of other POP compounds will be added in the future. The indicator also provides information on emissions by sector: Energy production and distribution; Energy use in industry; Industrial processes; Road transport; Non-road transport; Commercial, institutional and households; Solvent and product use; Agriculture; Waste; and Other. Geographically, the indicator covers the EEA-33. The EEA-33 country grouping includes countries of the EU-28 (Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom), European Free Trade Association (EFTA) countries (Iceland, Liechtenstein, Norway and Switzerland) and Turkey. Temporally, the indicator covers the same time coverage of the last version of the LRTAP Report.
Indicator Specification
Archived
Heavy metal emissions This indicator tracks trends in anthropogenic emissions of heavy metals over time, since 1990. The indicator also provides information on emissions by sector: energy production and distribution; energy use in industry; industrial processes; road transport; non-road transport; commercial, institutional and households; solvent and product use; agriculture; waste; and others. The geographical area covered by this indicator is the EEA-33 region. The EEA-33 region includes the countries of the EU-28 (Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom), the EFTA-4 (Iceland, Liechtenstein, Norway and Switzerland) and Turkey. The temporal coverage of this indicator is the same as the LRTAP Report.
Indicator Specification
Archived
Efficiency of conventional thermal electricity generation Output from conventional thermal power stations consists of gross electricity generation and also of any heat sold to third parties (combined heat and power plants) by conventional thermal public utility power stations as well as autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as a fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Energy efficiency in transformation EU-27 Share of primary energy by fuel type and, share of final energy consumption by sector and energy losses Share of energy losses, own consumption of the energy industry and final energy available for final consumption in primary energy, by Member State Structure in the efficiency of transformation and distribution of energy from primary energy consumption to final energy consumption, EU-27, 2009 Structure of CO 2 emissions from thermal power plants in EU-27, 2009 % share of input fuels into conventional thermal power plants Implied emission factors by fuel type – total fuel input by type to conventional thermal power plants (TJ) divided by CO 2 emissions from plants by fuel type Average efficiency for conventional thermal plant (total fuel inputs divided by total electricity and heat output) Share of CO 2 emissions by input fuel type. CO 2 emission savings per year for EU-27 at different transformation efficiencies compared to current 2009 efficiency
Indicator Specification
Archived
EEA32 Heavy metal (HM) emissions The indicator tracks trends since 1990 in anthropogenic emissions of heavy metals. The indicator also provides information on emissions by sectors: Energy industries; road and other transport; industry (processes and energy); other (energy); fugitive emissions; waste; agriculture and other (non energy). Geographical coverage: EEA-32 (EU-27 Member States, EFTA-4 countries (Iceland, Liechtenstein, Norway, and Switzerland) and Turkey) Temporal coverage: 1990-2007
Indicator Specification
Archived
EEA32 Persistent organic pollutant (POP) emissions The indicator tracks trends since 1990 in anthropogenic emissions of persistent organic pollutants. Emissions of polycyclic aromatic hydrocarbons (PAHs) are presently described, other POP compounds will be added in the future. The indicator also provides information on emissions by sector: Energy industries; road and other transport; industry (processes and energy); other (energy); fugitive emissions; waste; agriculture and other (non energy). Geographical coverage: EEA-32 (EU-27 Member States, EFTA-4 countries (Iceland, Liechtenstein, Norway, and Switzerland) and Turkey) Temporal coverage: 1990-2007
Indicator Specification
Archived
Transport emissions of air pollutants The indicator is based on the emission trend assessment of CO, CH 4 , NH 3 , NO x , NMVOCs, SO x and primary particulates. These substances are grouped into acidifying substances (NO x , SO x and NH 3 ), particulates (primary: PM 10, PM 2.5 , secondary: NO x , SO x and NH 3 ) and ozone precursors (CH 4 , CO, NMVOC and NO x ). The assessment is made for the total transport sector.
Indicator Specification
Archived
Primary energy consumption by fuel Total energy consumption or gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total gross inland energy consumption calculated for a calendar year.

Permalinks

Geographic coverage

For references, please go to https://www.eea.europa.eu/policy-documents/directive-2001-80-ec-large or scan the QR code.

PDF generated on 20 Apr 2024, 03:33 AM

EEA Page URL QR

Topics

Topics:

Tags

Filed under:
Filed under: emissions
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login