Write to us
Call us
Waterbase - TCM: QualityHSWaterD
The QualityHSWaterD table contains disaggregated data on hazardous substances in seawater, measured at Eionet-Water transitional, coastal or marine water monitoring stations, provided by national sources only. Each station has been assigned a unique Waterbase identifier (WaterbaseID) which can be used to link the Quality data with their respective Stations and Pressures data.
| Day | Day | day in which sample was taken, values in range 0-31. If the day value has not been supplied the value will be 0. | int(4) | -1 |
| Month | Month | month in which sample taken, values in range 0-12. If the month value has not been supplied the value will be 0. | int(4) | -1 |
| Year | Year | year of aggregation period (aggregated data sets), or year in which sample taken (disaggregated data sets), in format YYYY. Year should be no later than that requested in the last Eionet-Water data request. | int(4) | -1 |
| SampleID | Sample ID | unique sample identifier required if multiple samples taken on same day. SampleID default value is 0. | nvarchar(50) | -1 |
| Unit | Unit | unit of measurement. | nvarchar(30) | 0 |
| Remarks | Remarks | remarks, comments or explanatory notes. | nvarchar(255) | 0 |
| WaterbaseID | Waterbase ID | internally produced, unique identifier used to represent the monitoring station for rivers, lakes, transitional, coastal and marine waters, and water quantity, in the format CountryCode_WaterDataSet_NationalStationID (e.g. AT_RV_001), or the groundwater body, in the format CountryCode_WaterDataSet_EWN-Code (e.g. AT_GW_AT001). | nvarchar(255) | -1 |
| CASNo | Chemical Abstract Service Number | Chemical Abstract Service Number of determinand. | nvarchar(20) | 0 |
| Determinand | Determinand | determinand name. | nvarchar(255) | -1 |
| Concentration | Concentration | concentration of determinand in sample. In TCM data, concentration values recorded as below the limit of detection or determination should contain the limit of detection or determination in the concentration field, with the LimitFlag field set to . | float(8) | 0 |
| Salinity | Salinity | salinity of sample. | float(8) | 0 |
| SampleDepth | Sample depth | depth at which sample taken in m below water surface | float(8) | -1 |
| ThermoPos | Thermocline position | vertical position relative to thermocline at transitional, coastal and marine water station. AT=above thermocline, IT=in thermocline, BT=below thermocline. | varchar(2) | 0 |
| CountryCode | Country code | abbreviation of EEA Member or Collaborating country. ISO 3166-alpha-2 code elements. | varchar(2) | 0 |
| HaloPos | Halocline position | vertical position relative to halocline at transitional, coastal and marine water station. AH=above halocline, IH=in halocline, BH=below halocline. | varchar(2) | 0 |
| LimitOfDetectionFlag | Limit of detection or determination flag | flag to indicate sample below analytical limit of detection or determination in format . | varchar(1) | 0 |
Document Actions
Share with others