Waterbase-Rivers: Stations

Data Table

This page was archived on 05 Dec 2016 with reason: Other (The dataset is replaced by Waterbase - Water Quality dataset, which combines Waterbase - Rivers, Lakes and Groundwater into one. It's available at http://www.eea.europa.eu/data-and-maps/data/waterbase-water-quality/.)

The Stations table contains the physical characteristics of the Eionet-Water river monitoring stations. Each station has been assigned a unique Waterbase identifier (WaterbaseID) which can be used to link the Stations with their respective Quality and Pressures data.

Data and maps

Menu

Category

European data

Records

3495

Table definition

Latitude	Latitude	(Y) international geographical co-ordinates of the monitoring station in decimal degrees.	float(8)	0
RiverDischarge	River discharge	mean long term annual river discharge in m3/s at the monitoring station.	float(8)	0
RiverLength	River length	river length from monitoring station to source in km.	float(8)	0
CatchmentArea	Catchment area	upstream catchment area in km2.	float(8)	0
Altitude	Altitude	Altitude of monitoring station in m above sea level	float(8)	0
Longitude	Longitude	(X) international geographical co-ordinates of the monitoring station in decimal degrees.	float(8)	0
LargestStation	Largest station	largest station: 1 =yes, 0 = no.	int(1)	0
RepresentativeStation	Representative station	representative station: 1 =yes, 0 = no.	int(1)	0
ReferenceStation	Reference station	reference station: 1 =yes, 0 = no.	int(1)	0
FluxStation	Flux station	flux station: 1 =yes, 0 = no.	int(1)	0
ImpactStation	Impact station	impact station: 1 = yes, 0 = no.	int(1)	0
RevisionYear	Revision year	last year of revision or update of characteristics.	int(4)	0
ParametersNutrients	Parameters nutrients	nutrients and organic matter monitored at station: 1 =yes, 0 = no.	int(1)	0
ParametersHazsubs	Parameters hazardous substances	hazardous substances monitored at station: 1 =yes, 0 = no.	int(1)	0
SeaRegionName	Sea region name	regional sea name of which sea area is a part. Consistent with Marine Convention nomenclature.	nvarchar(100)	0
SeaConventionArea	Marine convention area	name of marine convention area.	nvarchar(100)	0
WaterBodyName	Water body name	name of water body in which monitoring station is located. Water body as defined / required by Water Framework Directive. A water body may contain more than one monitoring station.	nvarchar(200)	0
RiverBasinDistrict	River basin district	national name or identifier of the River Basin District in which the water body is located. River Basin Districts as required defined by the Water Framework Directive.	nvarchar(200)	0
SeaAreaName	Sea area name	sea area name or identifier into which river discharges, marine water is located, or direct discharge enters. Consistent with Marine Convention nomenclature.	nvarchar(100)	0
StationType	Station type	type of monitoring station: B = Reference, F = Flux, I = Impact, L = Largest, Most Important, R = Representative. Stations can be of more than one type, listed alphabetically with no separator (e.g. FL).	nvarchar(30)	0
StationSize	Station size	size of station based on upstream catchment area: < 50 km2: Small, >= 50 km2 and < 250 km2: Medium, >= 250 km2 and < 1000 km2: Large, >= 1000 km2 and < 2500 km2: Very Large, >= 2500 km2: Largest.	nvarchar(20)	0
WaterBodyID	Waterbody ID	national identification code of water body (if applicable) in which monitoring station is located. Water body as defined / required by Water Framework Directive. A water body may contain more than one monitoring station.	nvarchar(200)	0
NationalStationID	National station ID	national station identifier for rivers, lakes, transitional, coastal and marine waters and water quantity monitoring station. For transitional, coastal and marine waters, areas are recorded and reported as a discrete location, but location may relate to a station at a fixed geographical point, a broader area in which sampling locations vary from survey to survey or an area within a defined salinity range within which samples have been taken. When calculating loads, the national station identifier used should be the same ID previously supplied to represent the (flux) river monitoring station.	nvarchar(200)	0
RiverName	River name	river name at the national level.	nvarchar(200)	0
CatchmentName	Catchment name	catchment name at the national level. For transitional, coastal and marine waters, catchment name refers to major river catchment or basin draining into transitional or coastal water.	nvarchar(200)	0
CountryCode	Country code	ISO 3166-alpha-2 code elements	varchar(2)	0
Country	Country name (ISO 3166-1)	short name in English	nvarchar(50)	0
WaterbaseName	Waterbase name	name of the monitoring station for rivers, lakes, transitional, coastal and marine waters and water quantity, or name of the groundwater body.	nvarchar(200)	0
WaterBodyType	Water body type	RV = Rivers, LK = Lakes, GW = Groundwater, TCM = Transitional, Coastal and Marine Waters, QA = Water Quantity.	varchar(2)	0
Region	Region	region in which water body is located at the national level.	nvarchar(200)	0
WaterbaseID	Waterbase ID	internally produced, unique identifier used to represent the monitoring station for rivers, lakes, transitional, coastal and marine waters and water quantity, or groundwater body, in the format CountryCode_WaterDataSet_NationalStationID (e.g. GB_RV_12345).	varchar(200)	-1
DataSource	Data source	source of data: Eionet-Water, ICES.	varchar(50)	0
WaterDataset	Water data set	RV = River, LK = Lake, GW = Groundwater, TCM = Transitional, Coastal or Marine Water, QA = Water Quantity.	varchar(3)	0