You are here: Home / Environmental policy document catalogue / DIRECTIVE 2009/28/EC


Policy Document
DIRECTIVE 2009/28/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 23 April 2009 on the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC

Related content

Related indicators

Share of renewable energy in gross final energy consumption Share of renewable energy in gross final energy consumption Gross Final Renewable Energy Consumption is the amount of renewable energy consumed for electricity, heating and cooling, and transport in the Member States with actual and normalised hydro and wind power generation [1]  and expressed as a share against gross final energy consumption. The indicator is developed for measuring the contribution to the 2020 and 2030 objectives on renewable energy for the EU.   The Renewable Energy Directive (RED) [2]  commits the Union to reaching a 20% share of renewable energy in gross final energy consumption [3]  by 2020 and a 10% share of renewable energy consumed in transport by the same year.   It sets binding national targets for renewable energy consumption by 2020 and it prescribes for each country minimum indicative trajectories in the run-up to 2020 to ensure that national 2020 targets will be met. In addition, the Directive requires Member States to adopt and publish National Renewable Energy Action Plans (NREAPs) that outline the expected trajectories for the national share of RES for the years starting with 2010 and until 2020. Countries have submitted their NREAPs in 2010. They have the obligation to report biennially on national progress towards indicative RED and expected NREAP targets.   Europe 2020– the European Union’s ten-year growth strategy reaffirms the importance of the renewable energy sector for Europe. The 20 % renewable energy share in gross final consumption is one of the three headline targets for climate and sustainable energy under the strategy. The other EU-wide targets are achieving a 20 % reduction of the EU’s GHG emissions compared to 1990 and achieving a 20 % saving of the EU’s primary energy consumption compared to projections, both by 2020. Together, these represent the Union’s triple 20/20/20 objectives for climate and energy in the run-up to 2020. They are implemented through the EU’s 2009 climate and energy package and the 2012 Energy Efficiency Directive (EED).   For 2030, EU leaders endorsed the following three EU-wide targets: (i)            achieving a binding minimum 40 % domestic reduction of greenhouse gas emissions compared to 1990; (ii)           achieving a binding minimum 27 % share of renewable energy consumption; and (iii)          achieving an indicative minimum 27 % improvement in energy efficiency.  [1] In accordance with accounting rules under Directive 2009/28/EC, electricity from hydro and wind needs to be normalised to smooth the effects of annual variations (hydro 15 years and wind 5 years). [2] Directive 2009/28/EC [3] Gross final energy consumption means the energy commodities delivered for energy purposes to industry, transport, households, services including public services, agriculture, forestry and fisheries, including the consumption of electricity and heat by the energy branch for electricity and heat production and including losses of electricity and heat in distribution and transmission (cf. Art. 2f of Directive 2009/28/EC). With this, it excludes transformation losses which are included in gross inland energy consumption. In calculating a Member State's gross final energy consumption for the purpose of measuring its compliance with the targets and interim RED and NREAP trajectories, the amount of energy consumed in aviation shall, as a proportion of that Member State's gross final consumption of energy, be considered to be no more than 6.18% (4.12% for Cyprus and Malta).
Overview of the European energy system Overview of the European energy system Energy flows in European Union The Sankey diagram (Fig.1) shows the energy conversion from primary energy (coal, oil, natural gas, etc) to secondary energy commodities such as heat, electricity and manufactured fuels, through transformation plants (power stations, district heating, CHPs, oil refineries and other transformation plants) and the associated conversion losses. The right hand side of the diagram shows the final mix of energy consumption by different EU27 energy users (including: industry, transport, domestic, other final consumers and non-energy use). Note that renewables in transport for ENER 36 include all biofuels whether sustainable or not. Only a proportion of the primary energy entering the energy system of a country flows through to the end user for consumption.  There are various diversions and losses incurred before energy reaches the final consumer due to distribution losses and use in the energy sector. The Sankey diagram is useful in capturing the situation in a certain year but other indicators are needed to show the change in energy use over time. Energy efficiency of conventional thermal electricity and heat production Output from conventional thermal stations consists of gross electricity generation and also of any heat sold to third parties (combined heat and power plants) by conventional thermal public utility power stations as well as autoproducer thermal power stations. The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of electricity and heat production to the energy input as a fuel. Fuels include solid fuels (i.e. coal, lignite and equivalents, oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste. Units: Fuel input and electrical and heat output are measured in thousand tonnes of oil equivalent (ktoe). Efficiency is measured as the ratio of fuel output to input (%) Energy losses in transformation and distribution Numerator: Share of energy losses is the sum of own consumption of the energy industry, distribution losses and transformation losses (difference between transformation input and output). Denominator: Numerator plus final energy available for final consumption in primary energy. EU-27 Share of primary energy by fuel type and, share of final energy consumption by sector Total energy consumption or gross inland energy consumption represents the quantity of energy necessary to satisfy the inland consumption of a country. It is calculated as the sum of the gross inland consumption of energy from solid fuels, oil, gas, nuclear and renewable sources, and a small component of ‘other’ sources (industrial waste and net imports of electricity). The relative contribution of a specific fuel is measured by the ratio between the energy consumption originating from that specific fuel and the total gross inland energy consumption calculated for a calendar year (Fig.2). Units: Energy consumption is measured in thousand tonnes of oil equivalent (ktoe). The share of each fuel in total energy consumption is presented in the form of a percentage. EU27 net energy imports of solid fuels, oil, and gas from outside the EU27 was calculated as follows: total imports by fuel minus the sum of imports by fuel from other EU Member States minus total exports (Fig.1)
Overview of the electricity production and use in Europe Overview of the electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. The gross electricity generation at the plant level is defined as the electricity measured at the outlet of the main transformers. i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants utilising the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind. hydro. biomass and waste. solar PV and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses, it does not include own use by electricity producers or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households, services (including agriculture and other sectors).

Geographic coverage

Document Actions
Sign up to receive our reports (print and/or electronic) and quarterly e-newsletter.
Follow us
European Environment Agency (EEA)
Kongens Nytorv 6
1050 Copenhagen K
Phone: +45 3336 7100