All official European Union website addresses are in the europa.eu domain.
See all EU institutions and bodiesDo something for our planet, print this page only if needed. Even a small action can make an enormous difference when millions of people do it!
Indicator Assessment
In developed countries efforts have been underway for decades to reduce ozone precursors (NOx, CO). There is a progress in reducing total NOx and CO emissions. Emissions per vehicle kilometer for light-duty vehicles have been substantially reduced. But growth in transport activity and problems in controlling in-use emissions have tended to offset some of the hoped-for improvements.
The situation regarding ozone precursors in the transition countries (Eastern Europe, Caucasus and Central Asia and South Eastern Europe), especially in rapidly-growing urbanized areas, is somewhat different. Although NOx and CO emissions is expected to be reduced it will not happen as easily or as quickly as desired.
In developed countries it now appears that the efforts to curtail the total volume of emissions of the remaining transport-related "conventional" pollutants are bearing fruit. Much tighter vehicle emissions standards have been enacted, and the equipment to support them is being installed on new vehicles. The cleaner fuels required to permit this equipment to operate effectively are being produced and made widely available, at least in the developed world. For these reasons, it reasonable to project sharp reductions in the emissions of these "conventional" pollutants given policies now in place (or about to be implemented) in most developed countries.
The situation regarding ozone precursors (NOx, CO) in the transition countries of EECCA and SEE (especially its rapidly-growing urbanized areas) is somewhat different. NOx and CO emissions will not be reduced as easily or as quickly. Transport activity is projected to grow much more rapidly than in the developed world. And the rate of introduction of vehicle pollution control technology and the necessary related fuels in developing countries lags considerably behind that in developed countries. In the reference scenario, this lag is projected to continue but not worsen. It is assumed that assuring compliance with pollution control standards may prove more difficult in transition countries than developed countries.
It is expected that total emissions of most conventional pollutants will be reduced less rapidly, certainly for the next few decades and perhaps longer, before eventually declining.
The main reason of the decreasing amount of NOx and CO emissions appeared from the implementations of the strict standards and controls required by the accessed EU emission sectoral legislation and accordingly to the main policy, which addressed air pollution issues in Europe, the National emission ceilings directive. While temporary increasing of NOx and CO emissions in countries with transition economies are caused by increasing economical growth and, therefore, transport activity in the region.
Definition: Generally the indicator 'emissions of ozone precursors' tracks projected trends in anthropogenic emissions of ozone precursors: nitrogen oxides, carbon monoxide, methane and non methane volatile organic compounds, each weighted by their tropospheric ozone-forming potential.
The outlook form IEA/SMP model provides information only for nitrogen oxides and carbon monoxide in transport sector.
Model used: IEA/SMP
Ownership: World Business Council for Sustainable Development
Temporal coverage: 2000 - 2050
Geographical coverage: OECD Europe: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, Turkey, the United Kingdom; OECD North America: USA, Canada, Mexico; Former Soviet Union: Armenia, Azerbaijan, Belarus, Estonia, Georgia, Kazakhstan, Kyrgyzstan, Latvia, Lithuania, Republic of Moldova, Russian Federation, Tajikistan, Turkmenistan, Ukraine, Uzbekistan
Eastern Europe: Albania, Bosnia and Herzegovina, Bulgaria, Croatia, the Former Yugoslav Republic of Macedonia, Poland, Romania, Slovakia, Slovenia, Serbia and Montenegro; India; China
The indicator is measured in thousand tonnes per year.
The reduction of pollutant emissions is one of the strategic priorities stated in the White Paper on the Common Transport Policy (CTP) "European Transport Policy for 2010: Time to decide". Moreover, all of these declared as priority research themes with a contribution to make to the implementation of the transport policy recommended in the White Paper.
Emission ceiling targets for NOx and NMVOCs are specified in both the EU National Emission Ceilings Directive (NECD) and the Gothenburg protocol under the United Nations Convention on Long-Range Transboundary Air Pollution (LRTAP Convention) (UNECE 1999).
There are no specific EU emission targets set for either carbon monoxide (CO) or methane (CH4). However, there are several Directives and Protocols that affect the emissions of CO and CH4.
Mostly of all EECCA countries ratified the 1979 Convention on Long-Range Transboundary air pollution. Hower, only two of them signed in the Protocol to abate acidification, eutrophication and ground-level ozone, Gothenburg, 1999.
A list of countries ratified the 1979 Convention: Armenia (1997), Azerbajan (2002), Belarus (1980), Georgia (1999), Kazakhstan (2001), Kyrgyzstan (2000), Republic of Moldova (1995), Russian Federation (1980), the Ukraine (1980).
A list of countries that signed in the Protocol but still in process of its ratification: Armenia (1999), Republic of Moldova (2000).
There are no specific targets for CO emissions. Hovewer, emissions of NOx are covered by the EU National Emission Ceilings Directive (NECD) (2001/81/EC) and the Gothenburg protocol under the United Nations Convention on Long-Range Transboundary Air Pollution (LRTAP Convention) (UNECE 1999). See targets here.
NOx and CO emissions were calculated within the IEA/SMP model for transport sector. NMVOCs and methane are excluded from calculation procedures.
At a world regional average level of aggregation, there is no information in the model about where vehicles are traveling (e.g. urban v. rural) or how various emissions translate into atmospheric concentrations. The emissions trends are included to provide a general directional sense of whether total emissions from road vehicles increasing or decreasing over time. Five types of pollutants are tracked: nitrogen oxides (NOx), particulate matter (PM-10), carbon monoxide (CO), hydrocarbons (HC or VOC) and lead (Pb). A pollutant emission tracking has been developed only for road vehicles - no tracking for rail, air or shipping.
The approach used for light-duty vehicles has been to rely primarily on existing tailpipe emissions standards for new vehicles around the world, and the announced plans for phase-in of future, generally tighter, standards. For the developing world, in cases where information on existing or planned future standards was unavailable, simple assumptions were made regarding adoption of standards similar to the EU system (EURO 1 through EURO 5) in the future, at a certain time-lag after these have been implemented in Europe.
For other road vehicles (2/3 wheelers, trucks and buses), since the model does not track new vehicles or stock turnover, but only the existing stock of vehicles, estimates are based on assumed average emissions across the vehicle stock, and evolution of this average.
Several types of data are thus needed to generate estimates: average emissions for new and existing vehicles in the base year (2000), and estimated emissions of new vehicles, or in the case of non-LDVs estimated improvements in the stock average, in the future. While the new LDV emissions estimates are based primarily on current and future emissions standards, other sources were needed for the estimates related to existing vehicles. Few such sources exist that cover non-OECD regions.
The best source found for average in-use emissions in 2000 was a very recent (and as of May 2004, still unpublished) report from an OECD Environment Directorate study, part of their MOVE II project. The IEA has not been involved in that study, but obtained relevant estimates through internal communication. The study is highly relevant since it generates average emissions for all types of road vehicles by region (with a similar but not identical regional classification system as used here), vehicle type, vehicle vintage, and emissions control category (with seven categories, from uncontrolled up through the equivalent of EURO IV control levels). However, the authors warn that estimates are not final and could change. The IEA also relied on input from SMP Workstreams 2 and 3, including both data and review of the estimates and projections contained herein.
An important difference between the projections here and the OECD projections is the assumption here that all world regions will eventually adopt the same emissions standards being implemented in OECD regions. The OECD report restricts improvements to those emissions standards already announced or nearly finalized. This leads to a large difference in the projection - if developing regions do not continue to follow the OECD country lead (with some regions such as Africa and the Middle East assumed not to adopt any standards at all), then total emissions for each of the four pollutants in the developing world rises over time, rather than dropping in the projections are used here, with the assumption of a 10-15 year lag time in adopting OECD emissions standards in the developing world (described in more detail here).
(The flowchart on the page 4 of the IEA/SMP model spreadsheet privides an example of the logic behind the model on the basis of light-duty vehicles(e.g. automobiles)).
The IEA/SMP Transport Spreadsheet Model is designed to handle all transport modes and most vehicle types. It produces projections of vehicle stocks, travel, energy use and other indicators through 2050 for a reference case and for various policy cases and scenarios. It is designed to have some technology-oriented detail and to allow fairly detailed bottom-up modeling. The SMP spreadsheet model 1.60 is the most recent version and is available for a more detailed inspection (and use, though no user guide has been prepared and there are no plans, at this time, of providing on-going usersupport for the model. A very basic outline of how to use the model is provided in the first sheet of the model spreadsheet).
The model does not include any representation of economic relationships (e.g., elasticities) nor does it track costs. Rather, it is an "accounting" model, anchored by the "ASIF" identity:
Various indicators are tracked and characterized by coefficients per unit travel, per vehicle or per unit fuel use as appropriate.
The modes, technologies, fuels, regions and basic variables are included in the spreadsheet model. Not all technologies or variables are covered for all modes. Apart from energy use, the model tracks emissions of CO2, and CO2-equivalent GHG emissions (from vehicles as well as upstream), PM, NOx, HC, CO and Pb. Projections of safety (fatalities and injuries) are also incorporated.
The most detailed segment of the model covers light-duty vehicles. The flow chart on the page 4 of the Model Documentation provides an overview of the key linkages in the light-duty vehicle section of the model. For other passenger modes (such as buses, 2-wheelers), the approach is similar, however there is no stock model. Stocks are projected directly; vehicle sales needed to achieve these stocks is not currently tracked.
Overview of the projections, regions and viraibales used by the IEA/SMP transport spreadsheet model is peresented in the table below:
Sectors / Modes | Vehicle | Regions | Variables |
Light-duty | - Internal combustion engine: | - OECD Europe | Passenger kilometres |
The reference case projects one possible set of future conditions, based on recent trends in various important indicators and other variables. Adjustments are made for expected deviations from recent trends due to factors such as existing policies, population projections, income projections and expected availability of new technologies. Expectations for other future changes in trends, such as saturations in vehicle ownership, are also incorporated.
In general, no major new policies are assumed to be implemented beyond those already implemented in 2003. An exception to this is where there is clear evidence of what might be called "policy trajectories" - future policy actions that are either explicit or implicit in other trends. For example, a clear trend is emerging in the developing world to adopt vehicle emissions standards of a form similar to those already implemented in OECD countries. It is assumed that this "policy trajectory" will continue in the future. In contrast, no such policy trajectory is evident for reduced light-duty vehicle (LDV) fuel consumption; we therefore only incorporate existing fuel consumption programmes through the year they currently end; we assume a return after that date to historical (non-policy-driven) trends in fuel consumption.
In general, the model tried to avoid introducing significant changes in trends after 2030. We run the trends assumed to exist in 2030 out to 2050 in order to see the net effects and directions in that latter year of actions and events that often occurred years earlier.
For more infomation click here.
The indicator's calculations are based on the data from the indicators from the IEA/SMP models such as averagein-use emissions and total energy use across sectors, fuel and regions; and have to take into account current and future emissions standards.
Pollutant emissions tracking was implemented in the model to allow the Sustainable Mobility Project to better understand the vehicle emissions trends that result from the projection of vehicle sales, stocks and travel. At a world regional average level of aggregation, there is no information in the model about where vehicles are traveling (e.g. urban v. rural) or how various emissions translate into atmospheric concentrations. The emissions trends are included to provide a general directional sense of whether total emissions from road vehicles increasing or decreasing over time. Five types of pollutants are tracked: nitrogen oxides (NOx), particulate matter (PM-10), carbon monoxide (CO), hydrocarbons (HC or VOC) and lead (Pb). Note that for lead, a different approach is used which is discussed after the other pollutants. Pollutant emissions tracking have been developed only for road vehicles - no tracking for rail, air or shipping.
The approach used for light-duty vehicles has been to rely primarily on existing tailpipe emissions standards for new vehicles around the world, and the announced plans for phase-in of future, generally tighter, standards. For the developing world, in cases where information on existing or planned future standards was unavailable, simple assumptions were made regarding adoption of standards similar to the EU system (EURO 1 through EURO 5) in the future, at a certain time-lag after these have been implemented in Europe.
For other road vehicles (2/3 wheelers, trucks and buses), since the model does not track new vehicles or stock turnover, but only the existing stock of vehicles, estimates are based on assumed average emissions across the vehicle stock, and evolution of this average.
No methodology for gap filling has been specified. Probably this info has been added together with indicator calculation.
All data should be based on movements on national territory, regardless of the nationality of the vehicle. It is unknown what the assumptions are regarding movement of the transport when the assigned regions.
The model does not include any representation of economic relationships (e.g.,
elasticities) nor does it track costs. The IEA has a cost-optimization model capable of this, the ETP model, but this model was not employed in the SMP's work due to its lack of transparency and its complexity.
The table below provides a simplified picture of what types of variables and the level of
detail modelled for each major transport mode in the IEA/SMP transport spreadsheet model. As can be seen in the next table, there is a range of coverage by mode, as well as variations in the quality of the data available (indicated by x or i). In general, there is better data available for light-duty vehicles than for other modes, though for non-OECD regions most data is quite poor, except for aggregate estimates of transport energy consumption. New vehicle characteristics are only tracked for light-duty vehicles; existing stock is used as the basic vehicle indicator for all other modes.
The reference case includes the modes and variables identified in the table below:
| Auto | Air | Truck | Frt Rail | Pass Rail | Bus | Mini- bus | 2-3 wheel | Water |
OECD regions | |||||||||
Activity (passenger | - | - | - | - | - | - | i | i |
|
New vehicle | - |
|
|
|
|
|
|
|
|
Stock-average | - | - | - | - | - | - | i | i |
|
Calculation of | - | - | - | - | - | i | i | i |
|
Non-OECD regions | |||||||||
Activity (passenger | i | - | i | - | - | i | i | i |
|
New vehicle | i |
|
|
|
|
|
|
|
|
Stock-average | i | i | i | i | i | i | i | i |
|
Calculation of | i | - | i | - | - | i | i | i | - |
Note: - = have data of fair to good reliability; i = have data but incomplete or of poor reliability; blank = have nothing or have not attempted to project. Note that data of fair reliability is available for energy use across all road vehicles in non-OECD countries, but breaking this out into various road modes (cars, trucks, buses, 2- wheelers) is difficult and relatively unreliable.
For more information click here.
For references, please go to https://www.eea.europa.eu/data-and-maps/indicators/ape_f04-emissions-of-ozone-precursors/ape_f04-emissions-of-ozone-precursors or scan the QR code.
PDF generated on 28 Mar 2024, 10:42 AM
Engineered by: EEA Web Team
Software updated on 26 September 2023 08:13 from version 23.8.18
Software version: EEA Plone KGS 23.9.14
Document Actions
Share with others