All official European Union website addresses are in the europa.eu domain.
See all EU institutions and bodiesDo something for our planet, print this page only if needed. Even a small action can make an enormous difference when millions of people do it!
Indicator Specification
MAIN ADVANTAGES OF THE INDICATOR
Growing stock in forest and other wooded land, classified by forest type and by availability for wood supply, and balance between net annual increment and annual fellings of wood on forest available for wood supply.
ratio fellings to increment (5)
utilisation rate (%)
Growing stock is one of the basic statistics of any forest inventory and useful for various purposes. The standing volume of growing stock can by applying biomass expansion factors be converted into estimates of above and below-ground woody biomass. Data on growing stock, increment and fellings are crucial for the calculation of carbon budgets in the forest sector.
The balance between increment and fellings highlights the sustainability of timber production over time as well as the current availability and the potential for future availability of timber. For a long-run sustainability the annual fellings must not exceed the net annual increment.
An increase in the growing stock, relative to forest area, is an indication of maturing forests. The balance between the growth and felling in production forests is the best indicator to understand both potential for wood production possibilites, and conditions of biodiversity, health, recreation and other functions of forests. The quality of this indicator with regard to biodiversity would improve considerably if suggestions for improvements (see below) would be implemented.
EU 2020 biodiversity target 3
Definition of terms:
Growing stock:
The living tree component of the standing volume.
The standing volume refers to the volume of standing trees, living or dead, above-stump measured overbark to top (0 cm). Includes all trees with diameter over 0 cm diameter breast height (d.b.h. -- typically at 130 cm above stump). Includes: tops of stems, large branches, dead trees lying on the ground which can still be used for fibre or fuel. Excludes: Small branches, twigs and foliage. (UNECE/FAO (2000)).
Gross annual increment:
Average annual volume of increment over the reference period of all trees, measured to a minimum d.b.h. of 0 cm. Includes: the increment on trees which have been felled or die during the reference period (UNECE/FAO (2000)).
Net annual increment:
Average annual volume over the given reference period of gross increment less that of natural losses on all trees to a minimum diameter of 0 cm (d.b.h.) (UNECE/FAO (2000)).
Annual fellings:
Average annual standing volume of all trees, living or dead, measured overbark to a minimum diameter of 0 cm (d.b.h.) that are felled during the given reference period, including the volume of trees or parts of trees that are not removed from the forest, other wooded land or other felling site. Includes: silvicultural and pre-commercial thinnings and cleanings left in the forest; and natural losses that are recovered (harvested) (UNECE/FAO (2000)).
Various methods exist in countries to estimate fellings. Fellings are measured from the standing trees, already felled trees, at factory gates, or a combination of techniques. Typically a problem is posed by estimates of fellings for energy and especially the fraction of fellings for domestic firewood. Another issue in some countries is illegal logging and ranges for the volume of illegally felled wood is difficult to assess and with a large error margin.
Combined with forest scenario modelling, it is also possible to create cautious outlooks into the future development of this indicator. Such data are developed under auspices of UN-ECE/FAO as part of its European Forest Sector Outlook Studies (formerly: European Timber Trends Studies).
Measurement units for growing stock:
Status: m3.
Changes: m3/yr.
Status: m3/ha.
Changes: m3/ha/yr.
Measurement units for increment and fellings:
Status: m3.
Changes: m3/yr.
N/A
No uncertainty has been specified
No uncertainty has been specified
MAIN DISADVANTAGES OF THE INDICATOR
ANALYSIS OF OPTIONS
The 35 MCPFE quantitative indicators (http://www.mcpfe.org/documents/r_2007/ici) all relate to sustainable forestry management. From this set, those with most direct relevance to biodiversity were selected.
Forest certification was discussed as a possible indicator for sustainable forest management. Although there is a close connection between criteria and indicators and forest certification, i.e. both are promoting sustainable forest management, forest certification was not selected as indicator of area of sustainable managed forest. Certification is a voluntary, market driven tool, an assurance of conformity with a set of agreed standards, and does not suit long-term monitoring of changes in the forest. Moreover, it is restricted to multipurpose and plantation forests. Even non-certified forests could be sustainable managed.
Work specified here requires to be completed within 1 year from now.
Work specified here will require more than 1 year (from now) to be completed.
No resource needs have been specified
For references, please go to https://www.eea.europa.eu/data-and-maps/indicators/forest-growing-stock-increment-and-fellings or scan the QR code.
PDF generated on 28 Mar 2024, 06:30 PM
Engineered by: EEA Web Team
Software updated on 26 September 2023 08:13 from version 23.8.18
Software version: EEA Plone KGS 23.9.14
Document Actions
Share with others