next
previous
items

Indicator Specification

Generation and recycling of packaging waste

Indicator Specification
  Indicator codes: CSI 017 , WST 002
Published 21 Dec 2011 Last modified 04 Sep 2015
6 min read
This page was archived on 06 Nov 2013 with reason: No more updates will be done
Total packaging used in EU Member States in kg per capita. Recycling of packaging waste as a share of packaging used in EU Member States. The amount of packaging used is expected to equal the amount of packaging waste generated because of its short lifetime.
Required information is not filled in: Information about the starting date of the publishing schedule is missing.

Assessment versions

Published (reviewed and quality assured)
  • No published assessments
 

Rationale

Justification for indicator selection

Packaging represents a use of resources, and has typically a short lifetime. There are environmental impacts from the extraction of resources, the production of the packaging, the collection of packaging waste and the treatment or disposal of the waste.

Packaging waste is covered by specific EU regulations and there are specific targets for recycling and recovery. Information on the amounts of packaging waste generated therefore provides an indicator of the effectiveness of waste prevention policies.

Scientific references

Indicator definition

Total packaging used in EU Member States in kg per capita.

Recycling of packaging waste as a share of packaging used in EU Member States. The amount of packaging used is expected to equal the amount of packaging waste generated because of its short lifetime.

Units

kg per capita, percentage

 

Policy context and targets

Context description

6th Community Environment Action Programme

  • Better resource efficiency and resource and waste management to bring about more sustainable production and consumption patterns, thereby decoupling the use of resources and the generation of waste from the rate of economic growth and aiming to ensure that the consumption of renewable and non-renewable resources does not exceed the carrying capacity of the environment.
  • Achieving a significant overall reduction in the volumes of waste generated through waste prevention initiatives, better resource efficiency and a shift towards more sustainable production and consumption patterns
  • A significant reduction in the quantity of waste going to disposal and the volumes of hazardous waste produced while avoiding an increase of emissions to air, water and soil;
  • Encouraging reuse, and for wastes that are still generated: Preference should be given to recovery and especially to recycling.

Commission Communication COM(2005) 666 "Taking sustainable use of resources forward: A Thematic Strategy on the prevention and recycling of waste"

This strategy sets out guidelines for European Union (EU) action and describes the ways in which waste management can be improved.

  • Reducing the negative impact on the environment that is caused by waste throughout its life-span, from production to disposal, via recycling. This approach means that every item of waste is seen not only as a source of pollution to be reduced, but also as a potential resource to be exploited.
  • The objectives preceding the adoption of this strategy still apply, namely limiting waste, and promoting the re-use, recycling and recovery of waste. These objectives are integrated into the approach based on environmental impact and on the life-cycle of resources.

Waste Framework Directive (2008/98/EC)

This Directive establishes a legal framework for the treatment of waste within the Community. It aims at protecting the environment and human health through the prevention of the harmful effects of waste generation and waste management.

  • Prime importance is to specify basic notions such as recovery and disposal, so as to better organise waste management activities, since the generation of waste is increasing within the European Union.
  • Reinforcing measures to be taken with regard to prevention as well as the reduction of the impacts of waste generation and waste management on the environment. Finally, the recovery of waste should be encouraged so as to preserve natural resources.

Directive 2004/12 on packaging and packaging waste

  • Establishes targets for recycling and recovery of selected packaging materials.

Targets

Table 1: Targets of the Packaging and Packaging Waste Directive

By weightTargets in 94/62/ECtargets in 2004/12/EC 

Overall recovery target

min. 50 %, max. 65 %

min. 60 %

Overall recycling target

min. 25 %, max. 45 %

min. 55 %, max.80 %

Year to achieve targets

30 June 2001

31 December 2008

Note: Greece, Ireland, Portugal and the New Member States have individual derogations to meet the new targets. Depending on country, the targets will have to be reached 3 to 7 years later.

Source: Official Journal L 365 , 31/12/1994 P. 0010 - 0023 and Official Journal L 047 , 18/02/2004 P. 0026 - 0032

Related policy documents

Key policy question

Are we preventing the generation of packaging waste?

Specific policy question

Do we manage the generated waste (packaging) in a sustainable way?

 

Methodology

Methodology for indicator calculation

The graph of quantities of packaging waste generated is derived by dividing the amount of packaging used in the country by the country's population for the year in question.

Formula:

(Total packaging waste generation (kg) / Population) = Packaging waste generation per capita

 

The graph of recycling of packaging waste is derived by dividing the quantity of packaging waste recycled by the total quantity of packaging waste generated and expressing it as a percentage.

Formula:

(Recycling of packaging waste in tonnes (year x)) * 100 /

Total packaging waste generation in tonnes (year x)

 = Recycling rate for packaging waste (%)

 

Methodology for gap filling

No data gap filling is required

Methodology references

No methodology references available.

 

Data specifications

EEA data references

  • No datasets have been specified here.

External data references

Data sources in latest figures

 

Uncertainties

Methodology uncertainty

The Commission Decision of 3 February 1997 establishes the formats, which Member States are to use in the annual reporting on the Directive on Packaging and Packaging Waste. However, the decision does not define methods to estimate the quantities of packaging put on the market or to calculate the recovery and recycling rates in more detail to ensure data comparability.

Data sets uncertainty

Due to the absence of harmonised methodology, national data on packaging waste are not always comparable. Some countries include all packaging waste in the figure on total packaging waste generation while other countries only include the total for the four obligatory packaging waste streams; glass, metal, plastic, wood and paper and board.

Rationale uncertainty

No uncertainty has been specified

Further work

Short term work

Work specified here requires to be completed within 1 year from now.

Long term work

Work specified here will require more than 1 year (from now) to be completed.

Work description

Further work required: The Commission Decision of 3 February 1997 establishes the formats, which Member States are to use in the annual reporting on the Directive on Packaging and Packaging Waste. However, the decision does not define methods to estimate the quantities of packaging put on the market or to calculate the recovery and recycling rates in more detail to ensure data comparability.

Resource needs

No resource needs have been specified

Status

Not started

Deadline

2099/01/01 00:00:00 GMT+1

General metadata

Responsibility and ownership

EEA Contact Info

Jasmina Bogdanovic

Ownership

European Environment Agency (EEA)

Identification

Indicator code
CSI 017
WST 002
Specification
Version id: 1

Classification

DPSIR: Pressure
Typology: Descriptive indicator (Type A - What is happening to the environment and to humans?)

Permalinks

Document Actions