next
previous
items

Statistics on population

External Data Spec Published 05 Jul 2010
information.png Tags:
information.png Provider:
Statistical Office of the European Union (Eurostat)
information.png Dataset URL:
http://ec.europa.eu/eurostat/tgm/table.do?tab=table&init=1&plugin=1&pcode=tps00001&language=en
information.png Dataset path:

tps00001

Related content

Interactive charts

Produced figures

Used in indicators

Archived
Energy efficiency and energy consumption in the transport sector Energy efficiency progress (Figure 1) is measured from the ODEX indicator. This index aggregates the unit consumption trends for each transport mode in a single indicator for the whole sector. It is calculated at the level of 8 modes or vehicle types: cars, trucks, light vehicles, motorcycles, buses, total air transport, rail, and water transport. For cars, energy efficiency is measured by the specific consumption, expressed in litre/100km; for the transport of goods (trucks and light vehicles), the unit consumption per ton-km is used, as the main activity is to move goods; for other modes of transport various indicators of unit consumption are used, taking for each mode the most relevant indicator given the statistics available: toe/passenger for air, goe/pass-km for passenger rail, goe/ton-km for transport of goods by rail and water, toe per vehicle for motorcycles and buses.  The variation of the weighted index of the unit consumption by mode between t-1 and t is defined as follows It /It -1= 1/( It -1/It) with : energy share EC i  (consumption of each mode i   in total transport consumption); unit consumption index UC i (ratio : consumption related to traffic or specific consumption in l/100 km for cars); t refers the current year, t-1 to the previous year. The value at year t can be derived from the value at the previous year by reversing the calculation: It /It -1= 1/( It -1/It) ODEX is set at 100 for a reference year and successive values are then derived for each year t by the value of ODEX at year t-1 multiplied by It /It -1. The energy consumption variation of passenger transport in Figure 4 is broken down into 3 explanatory effects: activity effect (increase in traffic), modal shift effect (from private transport to public transport modes) and energy savings (change in specific consumption per unit of traffic). A positive “modal shift effect” means that the share of public passenger transport in passenger traffic is decreasing (shift from public transport to cars)  or the road in total freight traffic is increasing (shift from rail-water to road): this offsets energy savings. CO2 emissions for total transport are split into 2 explanatory effects (Figure 6): an activity effect due to an increase in traffic of passengers and freight, CO2 savings due to the reduction in the specific emissions of vehicles per unit of traffic.
Archived
Energy efficiency and energy consumption in the household sector Household energy consumption, covers all energy consumed in households for space heating, water heating, cooking and electricity.    Figures are reported either aggregated or disaggregated according to the end use categories named and as a total figure or per dwelling or m 2 of housing area. Climate fluctuates from one year to another. When the data is flagged as climate corrected, the data is normalized to reflect similar weather conditions. Consumption in useful energy per degree-day corrects for difference in heating equipment efficiency (which varies according to the fuel  uses) and climate. Energy efficiency indices (ODEX) can be defined as a ratio between the actual energy consumption of the sector in year t and the sum of the implied energy consumption from each underlying sub-sector/ end use in year t (based on the unit consumption of the sub-sector with a moving reference year. The evaluation of energy savings in household is carried out at the level of three end uses (heating, water heating and cooking) and five large appliances (refrigerators, freezers, washing machines, dishwashers and TVs). For each end use, the following indicators are used to measure efficiency progress: heating — unit consumption per m 2 per dwelling equivalent to central heating at normal climate; water heating — unit consumption per dwelling with water heating; and cooking — unit consumption per dwelling. The average energy consumption per m 2 per dwelling equivalent to central heating is used to leave out the impact of the diffusion of central heating. The effect of (heating) behaviour was estimated by assuming that technical progress cannot be reversed Household CO 2 -emissions covers the direct CO 2 emitted by fuel combustion.
Archived
Energy intensity in the service sector Services energy consumption covers all energy consumed in services for space heating, water heating, cooking and electricity. Energy consumption is corrected from climate to avoid yearly climatic corrections. Unit consumption per employee is the ratio between the energy consumption (total or electricity) and the number of employees (salaries employed in full time) The energy (or electricity) intensity is the ratio between the energy (electricity) consumption and the value added expressed in constant Euros (M€2000)
Archived
Energy efficiency and energy consumption in the transport sector Energy efficiency progress (Figure 1) is measured from the ODEX indicator. This index aggregates the unit consumption trends for each transport mode in a single indicator for the whole sector.                          The energy consumption variation of passenger transport in Figure 5 is broken down into 3 explanatory effects: activity effect (increase in traffic), modal shift effect (from private transport to public transport modes) and energy savings (change in specific consumption per unit of traffic). A positive “modal shift effect” means that the share of public passenger transport in passenger traffic is decreasing (shift from public transport to cars)  or the road in total freight traffic is increasing (shift from rail-water to road): this offsets energy savings. CO2 emissions for total transport are split into 2 explanatory effects (Figure 7): an activity effect due to an increase in traffic of passengers and freight, CO2 savings due to the reduction in the specific emissions of vehicles per unit of traffic.
Archived
Energy efficiency and energy consumption in the household sector Household energy consumption, covers all energy consumed in households for space heating, water heating, cooking and electricity. Figures are reported either aggregated or disaggregated according to the end use categories named and as a total figure or per dwelling or m2 of housing area. Climate fluctuates from one year to another. When the data is flagged as climate corrected, the data is normalized to reflect similar weather conditions.  Consumption in useful energy per degree-day corrects for difference in heating equipment efficiency (which varies according to the fuel  uses) and climate. Energy efficiency indices (ODEX) can be defined as a ratio between the actual energy consumption of the sector in year t and the sum of the implied energy consumption from each underlying sub-sector/ end use in year t (based on the unit consumption of the sub-sector with a moving reference year. Household CO2-emissions covers the direct CO2 emitted by fuel combustion.  

Permalinks

Geographic coverage

For references, please go to https://www.eea.europa.eu/data-and-maps/data/external/population-by-sex-and-age or scan the QR code.

PDF generated on 11 Aug 2020, 10:43 AM

EEA Page URL QR

Tags

Filed under:
Filed under:
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 29 June 2020 21:53 from version 20.6.23

Software version: EEA Plone KGS 20.6.27

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login