All official European Union website addresses are in the europa.eu domain.
See all EU institutions and bodiesDo something for our planet, print this page only if needed. Even a small action can make an enormous difference when millions of people do it!
Indicator Assessment
By 2100, global temperature change is expected to be well above the long-term sustainable objective set in the 6th EAP (bearing in mind the inherent scientific and analytical uncertainty characterising the assessment of climate change impacts).
Definition: The indicator shows trend in in annual average global surface temperature. The global average temperature change in the charts have been compared to be pre-industrial times.
Model used: IMAGE
Ownership: Netherlands Environmental Assessment Agency (MNP)
Temporal coverage: 2000 - 2100
Geographical coverage: global
Over a decade ago, most countries joined an international treaty -- the United Nations Framework Convention on Climate Change (UNFCCC) - to begin to consider what can be done to reduce global warming and to cope with whatever temperature increases are inevitable. Recently, a number of nations have approved an addition to the treaty: the Kyoto Protocol. The Kyoto Protocol, an international and legally binding agreement to reduce greenhouse gases emissions world wide, entered into force on February 16th 2005. The 1997 Kyoto Protocol shares the Convention's objective, principles and institutions, but significantly strengthens the Convention by committing Annex I Parties to individual, legally-binding targets to limit or reduce their greenhouse gas emissions.
To date 40 countries in the Pan-European region ratified the Kyoto Protocol, notably: Annex I: Belarus, Bulgaria, Croatia, Romania, Russian Federation, Ukraine, EU 25. Non-Annex I countries: Albania, Armenia, Azerbaijan, Georgia, Kyrgyzstan, Former Yugoslavian Republic Macedonia, Republic of Moldova, Turkmenistan, and Uzbekistan.
Kazakhstan has signed but not ratified the protocol. It expects to enter into quantitative GHG reduction obligations for the period of 2008-2012 and expects to become a full participant of the three Kyoto mechanisms. (Strategy of the Republic of Kazakhstan on Climate Change). Bosnia and Herzegovina, Serbia and Montenegro, Tajikistan and Turkey have no commitments as they did not sign or ratify the Protocol.
At the EU level the aims for reduction of the impact on Climate is expressed in the EC 6th Environmental Action Programme, EC 2006 Green paper on energy and a number of Council Decisions (see policy targets).
EECCA Environmental Strategy emphasizes importance of measure in energy and transport sectors in order to reduce Climate Change.
Global level
The UNFCC Convention and the Kyoto Protocol do not put individual targets for global temperature but they provide general policy context.
EU levelTo avoid serious climate change impacts, the European Council proposed in its sixth environmental action programme (6EAP, 2002), reaffirmed by the Environment Council and the European Council of 22-23 March 2005 (Presidency Conclusions, section IV (46)), that the global average temperature increase should be limited to not more than 2 degrees C above pre-industrial levels (about 1.3 degrees C above current global mean temperature). In addition, some studies have proposed a 'sustainable' target of limiting the rate of anthropogenic warming to 0.1 to 0.2 degrees C per decade (Leemans and Hootsman, 1998, WBGU, 2003).
The targets for both absolute temperature change (i.e. 2 degrees C) and rate of change (i.e. 0.1-0.2 degrees C per decade) were initially derived from the migration rates of selected plant species and the occurrence of past natural temperature changes. Although studies have indicated that such changes might still result in impacts in various vulnerable regions, both targets have been confirmed as (a) suitable (target) from both a scientific and a political perspective (e.g. Leemans and Hootsmans, 1998, WBGU, 2003).
EECCA levelThe global surface temperature change since pre-industrial times (1765) is calculated in the upwelling-diffusion climate model (UDCM) which is included as a one of the main components into the IMAGE 2.2. SRES Scenarios Model. In the UDCM four boxes are distinguished: land in northern and southern Hemisphere and ocean in northern and southern hemisphere. The temperature change of each of these boxes is based on the heat-absorbing capacity of the 40 oceanic layers. This heat-absorbing capacity is modelled for each oceanic box with an upwelling-diffusion energy-balance model. Therefore, each box has a different profile of temperature change. The global surface temperature is calculated as a weighted mean of the four boxes. The weights depend on the area within each box.
This indicator shows the most striking differences between low climate sensitivity runs (B1_low and A1F_low), high climate sensitivity runs (B1_high and A1F_high) and the main scenario runs (with medium climate sensitivity) (see uncertainties).
The Upwelling-Diffusion Climate Model (UDCM) of IMAGE 2.2 represents the core-model of the Atmospheric Ocean System (AOS). UDCM converts the concentrations of the different greenhouse gases and SO2 emissions into radiative forcings and successively into temperature changes of the global-mean surface and the ocean. UDCM is based on the MAGICC-model of Climate Research Unit (CRU) (Hulme et al., 2000). The MAGICC model is the most widely used simple climate model within the IPCC (2001). More details on MAGICC can be found in Raper et al. (1996) and Hulme et al. (2000). The implementation of MAGICC in IMAGE 2.2 and the calculation of the radiative forcings is described by Eickhout et al. (2001).
The model input and output of UDCM are presented in under data sets.
Historical data for the 1765-1995 period are used to initialise the carbon cycle and climate system. IMAGE 2.2 simulations cover the 1970-2100 period. Data for 1970-1995 are used to calibrate EIS and TES. Simulations up to the year 2100 are made on the basis of scenario assumptions on, for example, demography, food and energy consumption and technology and trade. Models are used for projections and gap fillings.
Many unknowns and uncertainties in the climate system are not reflected in the IMAGE scenarios. Some of the major uncertainties in the causal chain are the climate sensitivity and regional climate-change patterns. The direct effects of a changed climate are changes in carbon uptake by the biosphere and oceans and in the distribution and productivity of crops, as well as shifts in ecosystems. Indirectly, many other processes are influenced, which can lead to the concentrations of greenhouse gases in the atmosphere being built up differently and to different land-use patterns. IMAGE simulates the consequences of these changes in an integrated fashion, accounting for interactions and feedbacks. The outcome is thus not necessarily a linear function of climate sensitivity.
These climate uncertainties were addressed by providing additional simulations to illustrate the uncertainty in the climate sensitivity and in the regional climate-change patterns.
Climate sensitivity
Climate sensitivity refers to long-term (equilibrium) change in global mean surface temperature following a doubling of the atmospheric concentration in CO2 equivalents. According to IPCC, this climate sensitivity is between 1.5oC and 4.5oC. In earlier versions of IMAGE, the climate sensitivity generated by the climate model was 2.4oC. Due to the rigid structure of these earlier versions, we were unable to change this and assess the consequences of such a change.
In IMAGE 2.2 a simpler climate model MAGICC (see Upwelling-Diffusion Climate Model) is incorporated, allowing to define the climate sensitivity. The default value for IMAGE runs is 2.5, which is the median value of the IPCC range (median differs from mean because the range is logarithmic).
To test the uncertainty related to the climate sensitivity, runs with respectively a low (1.5oC) and high (4.5oC) climate sensitivity were created. A pattern-scaling procedure is used to obtain regional and seasonal climate-change patterns using the calculated increase in global mean temperature.
Runs with changed climate sensitivity are provided for the A1F (A1F low, A1F high) and B1 (B1 low, B1 high) scenarios on the main disc (IMAGE team 2001a). These scenarios span the full range of the SRES emission scenarios and therefore adequately illustrate the uncertainty of different climate sensitivities.
Regional climate-change patterns
Climate-change patterns are not simulated explicitly in IMAGE. The global mean temperature increase, as calculated by IMAGE, is linked with the climate patterns generated by a general circulation model (GCM) for the atmosphere and oceans. This linking takes place using the standardized IPCC pattern-scaling approach (Carter et al., 1994) and additional pattern-scaling for the climate response to sulphate aerosols forcing (Schlesinger et al., 2000; see Geographical Pattern Scaling, GPS). GCMs are currently the best tools available for simulating the physical processes that determine global climate dynamics and regional climate patterns.
GCMs simulate climate over a continuous global grid with a spatial resolution of a few hundred kilometres and a temporal resolution of less than an hour.
Most GCMs agree on the global patterns of climate change:
Regionally, however, there are large differences between the different GCMs, especially in precipitation-change patterns.
IMAGE 2.2 runs with five different climate-change patterns are provided on the supplementary disc (IMAGE team 2001b, RIVM CD-ROM publication 481508019) for the A1F, B1 and A2 scenarios. The aim of this material is to illustrate the uncertainties in SRES climate-change scenarios resulting from these differences in GCMs. The first two scenarios span the full range of the SRES emission scenarios, the latter being based on a highly different narrative with different demographic and socio-economic assumptions. The three scenarios therefore adequately illustrate the uncertainty of different climate patterns. Differences in the runs for each scenario indicate some of the uncertainty caused by regional variation in climate-change patterns (not the global mean).
The scenarios for five different GCM runs from the IPCC data centre were implemented, which comprised:
The input data to the UDCM model is atmospheric concentrations of greenhouse gases and emissions of SO2, which by itself is calculated on the basis of the other IMAGE 2.2. Models and bare all uncertainties related to those models (see more in methodology uncertainly).
The indicator shows trends in temperature data over time. Temperature is directly linked to the question of climate change and is a state variable that changes in response to the pressures of global warming.
There is growing evidence that anthropogenic emissions of greenhouse gases are (mostly) responsible for the recently observed fast increases in average temperature. Natural factors like volcanoes and sun activity could explain to a large extent the temperature variability up to mid of the 20th century, but they can explain only a small part of the recent warming.
For references, please go to https://www.eea.europa.eu/data-and-maps/indicators/global-and-european-temperature-eea/global-and-european-temperature-eea or scan the QR code.
PDF generated on 29 Mar 2024, 10:34 AM
Engineered by: EEA Web Team
Software updated on 26 September 2023 08:13 from version 23.8.18
Software version: EEA Plone KGS 23.9.14
Document Actions
Share with others