All official European Union website addresses are in the europa.eu domain.
See all EU institutions and bodiesDo something for our planet, print this page only if needed. Even a small action can make an enormous difference when millions of people do it!
Indicator Specification
The relevance of this indicator is contingent to the fact that efficient loading of vehicles results in less vehicle-kilometres being needed to transport the same number of tonnes. Consequently, less environmental damage occurs for transporting the same tonnage.
Load Factor: The load factor is the ratio of the average load to total vehicle freight capacity (vans,
lorries, train wagons, ships), expressed in terms of vehicle kilometres. Empty running is excluded from the calculation.
Empty running is calculated as the percentage of total vehicle-kilometres which are run empty.
Load factors and empty running are both expressed as percentages.
Vehicle utilisation is a measure of how efficiently the freight sector is transporting goods with its vehicles. If vehicle utilisation can be improved, through reduced empty running and making better use of each vehicle's carrying capacity then the same goods can be carried with fewer vehicle movements. This helps to reduce total freight vehicle traffic, measured as vehicle-km, thereby leading to reduced congestion, emissions, accidents and other environmental impacts of freight transport.
The liberalisation of the internal EU market has led to complex freight transport movements, an impact of which has been the practice of cabotage whereby hauliers from one country pick up and deliver goods within another country. Cabotage, which constitutes approximately 1 % of national road transport demand within the EU (EC, 2006b) is only legal if hauliers conduct no more than three cabotage operations in the country of destination within seven days of completing a delivery. However, the European Parliament has called for the lifting of all limits on cabotage by 2014. This should reduce the levels of empty running, improving the efficiency of transporting goods.
No international targets have been specified (although individual countries may have national targets in place).
The Indicator covers load factors, also known as lading factors. This is expressed as a percentage utilization of the available capacity in tonne-km. The indicator is based on qualitative information collected through the annual questionnaire (EEA) and other sources (studies and publications retrieved from the Internet).
As the maximum permissible load weight for a vehicle may vary between countries, the classifications from the country of vehicle registration are used. This should minimise inconsistencies when comparing data between countries.
Freight capacity for ships is equal to the deadweight (DWT), which is the difference between the displacement of a ship on summer load-line, and the total weight of the ship
Verification with EEA member countries via questionnaires.
No methodology references available.
The sources of data determining load factors as the number of tonne-km divided by the number of vehicle-km were disregarded. This was partly because this approach yields erratic results, and partly because the developments in tonnes per vehicle may equally well be explained by changes in vehicle size rather than degree of utilization of available capacity. Also, some countries report utilization as percentage of available tonne-km, others report as percentage of tonnes, not taking into account distances travelled. These two are not equivalent and show significant differences.
In road transport cases, the laden factor concerns transport of goods on national territory. Data has to be harmonised to include the contribution from empty running. In all cases the data included transport on own account and hired transport.
In addition, the base data could be inaccurate and may contain some errors due to low response rate of EU states. Errors could be reduced or eliminated with a higher response rate.
Strengths and weaknesses (at data level): load factors as expressed in percentage of maximum available tonne-km are not corrected for volume, as many loads are constrained by volume or deck space, rather than weight. A decline in weight-based load factors may hence be due to an increase in volume constrained loads rather than reduced utilization.
Questionnaire responses in 2008 were limited and scarce. However, TERM 2009 produced a higher number of responses than 2008. Therefore, it is likely that there will be considerable differences between the data collected in 2008 and data collected in 2009.
No uncertainty has been specified
Work specified here requires to be completed within 1 year from now.
Work specified here will require more than 1 year (from now) to be completed.
For references, please go to https://www.eea.europa.eu/data-and-maps/indicators/load-factors-for-freight-transport or scan the QR code.
PDF generated on 29 Mar 2024, 03:26 AM
Engineered by: EEA Web Team
Software updated on 26 September 2023 08:13 from version 23.8.18
Software version: EEA Plone KGS 23.9.14
Document Actions
Share with others