next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Policy Document

COM(2010) 2020 final, Europe 2020: A strategy for smart, sustainable and inclusive growth

Policy Document
European Commission, 2010. Europe 2020: A strategy for smart, sustainable and inclusive growth. COM(2010) 2020 final. 

Related content

Related indicators

Indicator Specification Imperviousness and imperviousness change in Europe The imperviousness indicator is defined as the yearly average imperviousness change between two reference years, as measured by imperviousness change products. The change is aggregated for a certain reference unit and expressed relative to the size of that unit (as a percentage). The imperviousness change value for a 100 m raster cell is based on 100 m imperviousness change products. The default reference unit is the country, but the indicator can be aggregated based on different spatial units. For example, for a certain country, a n imperviousness indicator value of 0.2 %, means that on average, an additional 0.2 % of this country's area has been sealed annually during the period between the two reference years in question. If above a certain rate of increase (threshold values) , this value can be used as a warning sign. The aggregation of imperviousness values to reference units is performed using the integrated spatial data platform at EEA.
Indicator Specification
Archived
Land take in Europe The land take indicator address the change in the area of agricultural, forest and other semi-natural land taken for urban and other artificial land development. Land take includes areas sealed by construction and urban infrastructure, as well as urban green areas, and sport and leisure facilities. The main drivers of land take are grouped as processes resulting in the extension of: housing, services and recreation; industrial and commercial sites; transport networks and infrastructures; mines, quarries and waste dumpsites; construction sites. Note: The reported land take change relates to the extension of urban areas and may also include parcels that were not sealed (e.g. urban green areas, and sport and leisure facilities). This is, in particular, the case for discontinuous urban fabric, which is considered as a whole. Similarly, monitoring the indicator with satellite images leads to the exclusion of most linear transport infrastructures, which are too narrow to be observed directly.
Indicator Specification Changes in fish distribution in European seas This indicator looks at the temporal development of the ratio between the number of Lusitanian and Boreal fish species within ICES Statistical rectangles and ICES divisions.
Indicator Specification
Archived
Imperviousness and imperviousness change The imperviousness indicator is defined as the yearly average imperviousness change between two reference years, as measured by imperviousness change products. The change is aggregated for a certain reference unit and expressed as relative to the size of that unit (as a percentage). The imperviousness change value for a 100 m raster cell is based on 100 m imperviousness change products. The default reference unit is the country, but the indicator can be aggregated based on different spatial units. For example, for a certain country, a n imperviousness indicator value of 0.2 %, means that on average, an additional 0.2 % of this country's area has been sealed annually during the period between the two reference years in question. If above a certain rate of increase (threshold values) , this value can be used as a warning sign. The aggregation of imperviousness values to reference units is performed using the LEAC CUBE method.
Indicator Specification
Archived
Population trends 1950 – 2100: globally and within Europe Population is defined as the “de facto population in a country, area or region as of 1 July of the year indicated” ( UN, 2015b ). Population changes from one year to another are due to natural population change (the difference between the number of live births and deaths during a given time period) ( Eurostat, 2015 ) and net migration (the number of immigrants minus the number of emigrants) ( UN, 2015b ) in a given country or region. The figures presented in this indicator include population estimates for 1950-2015 and eight projection variants for 2015-2100. These projection variants have been developed by the United Nations Department of Economic and Social Affairs (UN DESA) on the basis of varying assumptions related to fertility rates, mortality rates and international migration (for details see the Methodology section). The table below summarises the eight projection variants as defined in the World Population Prospects: The 2015 Revision ( UN, 2015a ). Assumptions Projection variant Fertility Mortality International migration Low fertility Low Normal Normal Medium fertility Medium Normal Normal High fertility High Normal Normal Constant fertility Constant as of 2010–2015 Normal Normal Instant replacement fertility Instant replacement as of 2015-2020 Normal Normal Constant mortality Medium Constant as of 2010–2015 Normal No change Constant as of 2010–2015 Constant as of 2010–2015 Normal Zero-migration Medium Normal Zero as of 2015–2020 Time horizon: 1950-2100 Geographical coverage: global, with specific attention to world regions and Europe. World regions are specified as defined by the United Nations Population Division - Department of Economic and Social Affairs: Asia, Africa, Europe, Latin America and the Caribbean, Northern America and Oceania. References Eurostat, 2015, ' Glossary: Natural population change ' UN, 2015a, 'World Population Prospects: The 2015 revision'   UN, 2015b, 'World Population Prospects: The 2015 Revision — Glossary of demographic terms'  
Indicator Specification
Archived
Imperviousness and imperviousness change The imperviousness indicator is defined as the yearly average imperviousness change between two reference years, as measured by imperviousness change products. The change is aggregated for a certain reference unit, and expressed and relative to the size of said unit (as a percentage). The imperviousness change value for a 100 m raster cell is based on 100 m imperviousness change products, corresponding to the difference in imperviousness status values (e.g. IMD2009-IMD2006). The default reference unit is the country, but the indicator can be aggregated based on different spatial units. For example, for a certain country, a n imperviousness indicator value of 0.2 %, means that an additional 0.2 % of this country's area has been sealed annually during the period between the two reference years in question. If above a certain rate of increase (threshold values) , this value can be used as a warning sign. The aggregation of imperviousness values to reference units is performed using the LEAC CUBE method.
Indicator Specification
Archived
Population change – Outlook from UN DESA Population includes all residents regardless of legal status and citizenship. Population change is defined as the “population increment over a period, that is, the difference between the population at the end of the period and that at the beginning of the period. It refers to five-year periods running from 1 July to 30 June of the initial and final years” ( UN, 2013c ). Within this indicator this includes natural population change (the difference between the number of live births and deaths during a given time period) ( Eurostat, 2015 ) and net migration (the difference between the number of persons entering and leaving a country during a given period) ( UN, 2013c ). The figures presented in this indicator include historical data and eight projection variants. These projection variants have been developed by UN DESA on the basis of varying assumptions related to fertility rates, mortality rates and international migration (for details see the Methodology section). The table below summarises the eight projections variants as defined in the World Population Prospects: The 2012 Revision( UN, 2013d ). Assumptions Projection variant Fertility Mortality International migration Low fertility Low Normal Normal Medium fertility Medium Normal Normal High fertility High Normal Normal Constant fertility Constant as of 2005 – 2010 Normal Normal Instant replacement fertility Instant replacement as of 2010 - 2015 Normal Normal Constant mortality Medium Constant as of 2005 – 2010 Normal No change Constant as of 2005 – 2010 Constant as of 2005 – 2010 Normal Zero-migration Medium Normal Zero as of 2010 – 2015 Time horizon: 1950 to 2100 Geographical coverage: global, with specific attention to world regions and Europe. World regions are specified as defined by the United Nations Population Division Department of Economic and Social Affairs: Asia; Africa; Europe; Latin America and the Caribbean; Northern America; Oceania. References Eurostat, 2015, ' Glossary: Natural population change ' UN, 2013c, ' World Population Prospects: The 2012 Revision — Glossary of demographic terms ' UN, 2013d, ' World Population Prospects: The 2012 Revision — Highlights and advance tables ', Working Paper No. ESA/P/WP.228, United Nations Department of Economic and Social Affairs (UN DESA), New York, US.
Indicator Specification
Archived
Emission intensity of manufacturing industries in Europe This indicator is used to illustrate the emission intensity of manufacturing industries expressed as the amount of pollutant discharged in water per unit of production of the manufacturing industries (expressed as one million Euro gross value added). Furthermore, the indicator shows a decoupling of economic growth (GVA) from  environmental impact (emission of pollutants). The decoupling indicator displays the percentage change in the emission of pollutants from manufacturing against the change in the gross value added (GVA) of the manufacturing industry over the same period of time (2004-2010). Absolute decoupling occurs when the environmentally relevant variable is stable or decreasing, while the economic driving force is growing. Relative decoupling occurs when the growth rate of the emission is positive, but less than the growth rate of GVA. In line with the statistical classification of economic activities in the European Community (NACE Rev. 2 Section C  (divisions 10-33)) the following manufacturing industries are considered: Division 10: Manufacture of food products Division 11: Manufacture of beverages Division 12: Manufacture of tobacco products Division 13: Manufacture of textiles Division 14: Manufacture of wearing apparel Division 15: Manufacture of leather and related products Division 16: Manufacture of wood and of products of wood and cork, except furniture; manufacture of articles of straw and plaiting materials Division 17: Manufacture of paper and paper products Division 18: Printing and reproduction of recorded media Division 19: Manufacture of coke, refined petroleum products Division 20: Manufacture of chemicals, chemical products Division 21: Manufacture of basic pharmaceutical products and pharmaceutical preparations Division 22: Manufacture of rubber and plastic products Division 23: Manufacture of other non-metallic mineral products Division 24: Manufacture of basic metals Division 25: Manufacture of fabricated metal products, except machinery and equipment Division 26: Manufacture of computer, electronic and optical products Division 27: Manufacture of electrical equipment Division 28: Manufacture of machinery and equipment not elsewhere classified Division 29: Manufacture of motor vehicles, trailers and semi-trailers Division 30: Manufacture of other transport equipment Division 31: Manufacture of furniture Division 32: Other manufacturing Division 33: Repair and installation of machinery and equipment The following divisions from NACE Rev. 2 Section C were considered: Food industry: division 10, 11 Chemical industry: division 20, groups 20.1-20.6 Metal industry:division 24, 25    
Indicator Specification
Archived
Gross Domestic Product (GDP) - Outlook from the Organisation for Economic Co-operation and Development (OECD) GDP can be calculated in three ways, providing different perspectives on the balance of economic activity. Essentially these three approaches consist of adding up the total value of incomes, spending or production in a country or region during a period of time. More formally they can be defined as follows (OECD, 2015b): the ‘income approach’ calculates GDP based on the sum of primary incomes distributed by resident producer unit; the ‘expenditure approach’ calculates GDP based on the sum of the final uses of goods and services (all uses except intermediate consumption) measured in purchasers' prices, less the value of imports of goods and services; the ‘output approach’ calculates GDP as the sum of the gross values added of all resident institutional units engaged in production (plus any taxes, and minus any subsidies, on products not included in the value of their outputs). Applying these approaches using current price data will deliver an estimate of nominal GDP. Nominal GDP data are often adjusted to facilitate meaningful comparisons of economic output between different time periods and between different countries. For example, nominal GDP is adjusted to remove the effects of price inflation in order to provide a more realistic measure of changes in the volume of economic production. Constant price estimates of GDP are obtained by calculating the value of production in different periods using the price levels from a single base period. Similarly, nominal GDP growth is converted into real GDP growth using the ‘GDP deflator’ (OECD, 2015a). Price differences between countries can likewise make it hard to compare the volume of national production using nominal price data at market exchange rates. Purchasing power parity (PPP) estimates of GDP compensate for differences in prices between countries to provide a better comparison of the volume of goods and services produced in different countries or regions. They thereby support better comparisons of living standards (OECD, 2015c). The data shown in this indicator are expressed in 2005 US dollars in PPP terms. References OECD, 2015a: 'OECD Glossary of Statistical Terms - Gross domestic product (GDP) – constant prices Definition' ( http://stats.oecd.org/glossary/detail.asp?ID=1164 ) accessed 19 Jan 2015. OECD, 2015b: 'OECD Glossary of Statistical Terms - Gross domestic product (GDP) Definition' ( http://stats.oecd.org/glossary/detail.asp?ID=1163 ) accessed 19 Jan 2015. OECD, 2015c: 'OECD Glossary of Statistical Terms - Purchasing power parities (PPPs) – OECD Definition' ( http://stats.oecd.org/glossary/detail.asp?ID=2205 ) accessed 19 Jan 2015.
Indicator Specification
Archived
Emission intensity of manufacturing industries in Europe The indicator is used to illustrate emission intensity of manufacturing industries expressed as amount of pollutant discharged in water per unit of production of manufacturing industries (expressed as one million Euro gross value added). Furthermore, indicator shows decoupling of economic growth (GVA) from the environmental impact (emission of pollutants).Decoupling indicator displays the percentage of change in emission of pollutants from manufacturing plotted together with the change in the gross value added (GVA) of the manufacturing industry over the same period of time (between 2004-2010). Absolute decoupling occurs when the environmentally relevant variable is stable or decreasing while the economic driving force is growing. Relative decoupling occurs when the growth rate of the emission is positive, but less than the growth rate of the GVA. In line with Statistical classification of economic activities in the European Community NACE Rev. 2 Section C  (divisions 10-33) the following industries : are considered in the „manufacturing“:” Division 10: Manufacture of food products Division 11: Manufacture of beverages Division 12: Manufacture of tobacco products Division 13: Manufacture of textiles Division 14: Manufacture of wearing apparel Division 15: Manufacture of leather and related products Division 16: Manufacture of wood and of products of wood and cork, except furniture; manu- facture of articles of straw and plaiting materials Division 17: Manufacture of paper and paper products Division 18: Printing and reproduction of recorded media Division 19: Manufacture of coke, refined petroleum products Division 20: Manufacture of chemicals, chemical products Division 21: Manufacture of basic pharmaceutical products and pharmaceutical preparations Division 22: Manufacture of rubber and plastic products Division 23: Manufacture of other non-metallic mineral products Division 24: Manufacture of basic metals Division 25: Manufacture of fabricated metal products, except machinery and equipment Division 26: Manufacture of computer, electronic and optical products Division 27: Manufacture of electrical equipment Division 28: Manufacture of machineryand equipment n.e.c. Division 29: Manufacture of motor vehicles, trailers and semi-trailers Division 30: Manufacture of other transport equipment Division 31: Manufacture of furniture Division 32: Other manufacturing Division 33: Repair and installation of machinery and equipment   The following divisions from NACE Rev. 2 Section C were considered for: Food industry: division 10, 11 Chemical industry: division 20, groups 20.1-20.6 Metal industry:division 24, 25    
Indicator Specification
Archived
Emission intensity of agriculture in Europe The indicator is used to illustrate decoupling of economic growth (Gross Value Added-GVA) from the environmental impact (nutrient losses).The indicator displays the percentage of change in emission of nutrients from agriculture  (expressed as nutrient balance) plotted together with the change in the gross value added (GVA) of the agriculture industry over the same period of time (between 2000-2011). Absolute decoupling occurs when the environmentally relevant variable is stable or decreasing while the economic driving force is growing. Relative decoupling occurs when the growth rate of the emission is positive, but less than the growth rate of the GVA. Furthermore, the indicator illustrates emission intensity of the agriculture sector expressed as the amount of nutrient balance in agriculture per unit of production of the agriculture sector (expressed as one million Euro of gross value added). The indicator illustrates both emission intensity based on total GVA (which includes subsidies) and emission intensity based on GVA, excluding subsidies.
Indicator Specification
Archived
Land take This indicator looks at the change in the amount of agricultural, forest and other semi-natural and natural land taken by urban and other artificial land development. It includes areas sealed by construction and urban infrastructure, as well as urban green areas, and sport and leisure facilities. The main drivers of land take are grouped in processes resulting in the extension of: housing, services and recreation; industrial and commercial sites; transport networks and infrastructures; mines, quarries and waste dumpsites; construction sites.
Indicator Specification
Archived
Investment in transport infrastructure The term “transport infrastructure” refers only to infrastructure that is open to the general public. It covers buildings and other constructions, as well as machinery and equipment, but it excludes vehicles and rolling stock. Investment in infrastructure covers expenditure on new construction, and the extension of existing infrastructure, including reconstruction, renewal and major repairs to infrastructure. For rail, infrastructure includes land, permanent-way constructions, buildings, bridges and tunnels, as well as immovable fixtures, fittings and installations connected with them (signaling, telecommunications, catenaries, electricity sub-stations, etc.) as opposed to rolling stock. For road, maintenance includes surface maintenance, patching and running repairs (work relating to the roughness of the carriageway wearing course, roadsides, etc.). For inland waterways, expenditure on locks is included.
Indicator Specification
Archived
Transport fuel prices and taxes in Europe This indicator considers the price of fuel in the EU, including cost price, excise duty and VAT. Definitions: 'All petrol' is a consumption-weighted average price of both leaded and unleaded fuel, corrected using the energy-content of an equivalent amount of unleaded petrol. 'All fuel, unleaded petrol equivalent' is a consumption-weighted average price of unleaded and leaded petrol and diesel, corrected using the energy content of an equivalent amount of unleaded petrol. 'Nominal' is the price with no adjustment for inflation. 'Real' is the price corrected for inflation, using 2015 as the baseline year. 'Average, all fuel, unleaded petrol equivalent (real, weighted by consumption)' is the consumption-weighted average of the 'All fuel, unleaded petrol equivalent (real)' line across the full time series.
Indicator Specification
Archived
Final energy consumption in Europe by mode of transport This indicator considers total energy consumption in transport in PJ from 1990 onwards. The transport modes included are bunkers (sea transport), air transport (domestic and international), inland navigation, rail transport and road transport.
Indicator Specification
Draft
Imperviousness and imperviousness change in Europe This indicator measures the covering of the soil surface with non-permeable materials, hence indicating imperviousness. The aggregation of imperviousness values to reference units, such as urban areas, floodplains, coastal zones or protected areas is performed using the integrated spatial data platform of the EEA.

Permalinks

Geographic coverage

For references, please go to https://www.eea.europa.eu/policy-documents/com-2010-2020-europe-2020 or scan the QR code.

PDF generated on 19 Apr 2024, 01:53 AM

EEA Page URL QR

Topics

Tags

Filed under:
Filed under: sustainability
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login