All official European Union website addresses are in the europa.eu domain.
See all EU institutions and bodiesDo something for our planet, print this page only if needed. Even a small action can make an enormous difference when millions of people do it!
Indicator Assessment
In the EEA-33 region, emissions of PAHs fell by 62 % between 1990 and 2013 (Figure 1). A combination of targeted legislation, the details of which are set out in the 'Indicator specification - policy context' section below, coupled with improved controls and abatement techniques have led to significant progress in most countries' attempts to reduce PAH emissions (Figure 5).
While the majority of individual countries have reported a decrease in PAH emissions since 1990, there are five countries (Denmark, Finland, Iceland, Italy and Malta) in which they have increased. Of these countries, emissions in Iceland and Malta have risen by more than 50 % since 1990. One reason for these increased emissions is the introduction of policy measures that have encouraged the burning of renewable materials (e.g. wood by Danish households). Wood burning produces emissions of PAHs, so in this instance, policies implemented to address one environmental issue (climate change) have had unintended consequences in terms of air pollution. In absolute terms, emissions of PAHs from both countries are relatively low compared to other countries, but the effect on local populations and environmental quality may nevertheless be significant. Of the EEA-33 countries, the highest PAH emissions were reported by Spain and Germany, where emissions are nearly five times greater than the average reported estimate.
Emissions of HCB have fallen sharply in the EEA-33 since 1990. This was mostly due to a drop in HCB emissions in the United Kingdom of 4.3 tonnes between 1998 and 1999 that accounted for 98 % of the total emissions reduction in the region in 1999 (Figure 2). This large decrease was due to the introduction of regulations in the UK to control the use of hexachloroethane (HCE) tablets as a degassing agent in secondary aluminium production. A total of 61 % of the reduction across all EEA-33 countries since 1990 can be attributed to the fall in HCB emissions in the United Kingdom, from 59 % of EEA-33 emissions in 1990, to just 12% in 2013.
Emissions of PCBs in the EEA-33 fell by 76 % between 1990 and 2013, due mainly to reductions in 'Industrial processes and product use' emissions, which accounted for 69 % of the decrease over this period (Figure 6). Within the EEA-33, the only countries in which PCB emissions rose above 1990 levels are Portugal and Spain (Figure 3). A total of 24 countries reported lower emissions in 2013 than 1990, and the remaining seven countries either did not report data, or reported zero emissions for 1990.
By 2013, reported emissions of dioxins and furans in the EEA-33 countries had decreased by 84 % compared with 1990 levels. Of the 31 countries that reported non-zero emissions, only Latvia and Malta reported an increase in emissions between 1990 and 2013 (Figure 4). The overall decrease in emissions across all EEA-33 countries was due significant reductions in 'Energy production and distribution' sector emissions (28 % of the overall decrease), 'Waste' (23 %) and 'Commercial, institutional and households' (22 %) (Figure 6). In 2013, 40 % of dioxin and furan emissions came from sources in the 'Commercial, institutional and households' sector, 18 % from 'Energy use in industry' and 18 % from 'Waste' (Figure 6).
Major sources of persistent organic pollutants (POPs) emissions typically include residential combustion processes (open fires, coal and wood burning for heating purposes etc.), industrial metal production processes and the road transport sector.
Commercial, institutional and households: In the EEA-33 countries, current emissions from ‘Commercial, Institutional and Household’ sources account for around two thirds of total PAH emissions and about 40 % of total dioxin and furan emissions. Household PAH emissions have declined since 1990 as a result of the decreased residential use of coal.
Industrial processes and product use: 'Industrial processes and product use' account for nearly half of all PCB emissions in the EEA-33, but current emissions from this sector have decreased by over 80 % since 1990. Reductions in POPs emissions in the same sector have occurred as a result of improvements in abatement technologies for metal refining and smelting.
Road transport: Road transport emissions do not make a particularly large contribution to total POPs emissions in the EEA-33. However, emissions have substantially reduced (-52 %) from 1990 levels due to stricter regulations on emissions from road vehicles.
The units used in this indicator are the tonne (metric ton).
Targeted European Commission legislation (directives and regulations), coupled with improved control and abatement techniques, have led to good progress being made by the EEA-33 countries towards reducing air emissions of POPs, including the PAH group of chemicals. Such legislation is described below.
In May 2009, additional chemicals were added to the Stockholm Convention:
The EC Communication on a Community Strategy for Dioxins, Furans and PCBs (COM (2001) 593 final) aims to assess the current state of the environment and to reduce human exposure and long-term environmental effects. This communication does not propose legislative measures, but could be the basis for a Community action plan.
The Directive on the Limitation of Emissions of Certain Pollutants into the Air from Large Combustion Plants (2001/80/EC) has had the effect of reducing heavy metal and PAH emissions via dust control and absorption.
Regulation (EC) No 850/2004 on Persistent Organic Pollutants entered into force on 20 May 2004. The main purpose of this regulation is to enable the European Community to ratify the Stockholm Convention and the Aarhus Protocol. The regulation also deals with stockpiles of redundant substances.
Emissions of a number of heavy metals released from certain industrial facilities are also estimated and reported under the requirements of the European Pollutant Release and Transfer Register Regulation (E-PRTR) (166/2006/EC).
The EU Directive on Ambient Air Quality and Cleaner Air for Europe (2008/50/EC) and Directive 2004/107/EC relating to heavy metals and polycyclic aromatic hydrocarbons in ambient air contain provisions, and target and limit values for the further control of air pollutants in ambient air.
There are also a number of specific EU environmental quality and emission standards for heavy metals and POPs in coastal and inland waters, drinking waters, etc. These have only indirect relevance to air emissions as they do not directly specify emission or precipitation quality requirements, but rather specify the required quality of receiving waters. Such measures include Directive 84/491/EEC on HCH discharges; Directives 76/464/EC and 86/280/EC on dangerous substances; and the Water Framework Directive (2000/60/EC).
As noted above, the Aarhus Protocol on POPs to the UNECE LRTAP Convention obliges parties to reduce their emissions of dioxins, furans, PAHs and HCB to below their 1990 levels (or an alternative year between 1985 and 1995 inclusive).
This indicator is based on the national total and sectoral emissions officially reported to the EEA and UNECE/EMEP (United Nations Economic Commission for Europe/Co-operative programme for monitoring and evaluation of the long-range transmission of air pollutants in Europe) LRTAP Convention. For the EU-28 Member States, the data used are consistent with the emissions data reported by the EU in its annual submission to the LRTAP Convention.
Recommended methodologies for emission inventory estimation are compiled in the EMEP/EEA Air Pollutant Emission Inventory Guidebook (EMEP/EEA, 2016). Base data are available from the EEA Data Service and the EMEP web site. If necessary, gaps in reported data are filled by the European Topic Centre for Air and Climate Change using simple interpolation techniques (see below). The final gap-filled data used in this indicator are available from the EEA Data Service .
Base data, reported in the UNECE/EMEP nomenclature for reporting (NFR14) sector format, are aggregated into the following EEA sector codes to obtain a consistent reporting format across all countries and pollutants:
The following table shows the conversion of NFR sector codes used for reporting by countries into EEA sector codes:
|
|
An improved gap-filling methodology was implemented in 2010 that enables a complete time-series trend for the main air pollutants (nitrogen oxides (NOx), sulphur oxides (SOx), non-methane volatile organic compounds (NMVOCs), ammonia (NH3) and carbon monoxide (CO)) to be compiled. In cases in which countries did not report emissions for any year, it meant that gap filling could not be applied. For these pollutants, therefore, the aggregated data are not yet complete and are likely to underestimate true emissions. Further methodological details of the gap-filling procedure are provided in section 'Data gaps and gap-filling' of the European Union emission inventory report 1990–2017 under the UNECE Convention on Long-range Transboundary Air Pollution (LRTAP).
The use of gap filling for countries that have not reported emissions for one of more years can potentially lead to artificial trends, but it is considered unavoidable if a comprehensive and comparable set of emission data for European countries is required for policy analysis purposes.
Uncertainties in the emission estimates of PAHs reported by countries are considered to be higher than for other more 'traditional' air pollutants, such as NOx and SO2, because of the relatively high uncertainties that exist with regard to both activity data and emission factors for this group of pollutants. Emission estimates for the other POPs are also considered to have a high degree of uncertainty.
This indicator is regularly updated by the EEA and is used in state of the environment assessments. The uncertainties related to methodology and data sets are therefore important. Any uncertainties involved in the calculation and the data sets must be accurately communicated in the assessment, in order to prevent erroneous messages from influencing policy actions or processes.
For references, please go to https://www.eea.europa.eu/data-and-maps/indicators/eea32-persistent-organic-pollutant-pop-emissions-1/assessment-5 or scan the QR code.
PDF generated on 28 Mar 2024, 05:48 PM
Engineered by: EEA Web Team
Software updated on 26 September 2023 08:13 from version 23.8.18
Software version: EEA Plone KGS 23.9.14
Document Actions
Share with others