Personal tools

next
previous
items

Skip to content. | Skip to navigation

Sound and independent information
on the environment

You are here: Home / Data and maps / Datasets / Waterbase - Transitional, coastal and marine waters / Waterbase-TCM: HazSubs Sediment

Waterbase-TCM: HazSubs Sediment

The HazSubs Sediment table contains disaggregated data on hazardous substances in sediment, measured at Eionet-Water transitional, coastal or marine water monitoring stations, provided by national sources only. Each station has been assigned a unique Waterbase identifier (WaterbaseID) which can be used to link the Quality data with their respective Stations data.
Category
European data
Records
-1
Table definition
Year Year year of aggregation period (aggregated data sets), or year in which sample taken (disaggregated data sets), in format YYYY. Year should be no later than that requested in the last Eionet-Water data request. int(4) 0
Month Month month in which sample taken, values in range 0-12. If the month value has not been supplied the value will be 0. int(4) 0
Day Day day in which sample was taken, values in range 0-31. If the day value has not been supplied the value will be 0. int(4) 0
Concentration Concentration concentration of determinand in sample. In TCM data, concentration values recorded as below the limit of detection or determination should contain the limit of detection or determination in the concentration field, with the LimitFlag field set to <. float(8) 0
BottomDepth Bottom depth of sediment depth of sea bottom at sampling site in m. float(8) 0
SedimentTop Top of sediment layer top of analysed sediment layer measured from the sediment surface in cm. Value will be 0 if the top of the sediment layer is the surface. float(8) 0
SedimentBottom Bottom of sediment layer bottom of analysed sediment layer measured from the sediment surface in cm. float(8) 0
Organic carbon Organic carbon organic carbon content as a percentage of total dry weight. float(8) 0
DryWetRatio Dry wet ratio ratio of dry weight to wet weight as a percentage. float(8) 0
CountryCode Country code abbreviation of EEA Member or Collaborating country. ISO 3166-alpha-2 code elements. nvarchar(2) -1
WaterbaseID Waterbase ID internally produced, unique identifier used to represent the monitoring station for rivers, lakes, transitional, coastal and marine waters, and water quantity, in the format CountryCode_WaterDataSet_NationalStationID (e.g. AT_RV_001), or the groundwater body, in the format CountryCode_WaterDataSet_EWN-Code (e.g. AT_GW_AT001). nvarchar(60) -1
Nationalstationid National station ID Identifier of the monitoring station for rivers, lakes, transitional, coastal and marine waters unique at the national level. nvarchar(50) 0
SampleID Sample ID unique sample identifier required if multiple samples taken on same day. SampleID default value is 0. nvarchar(20) 0
Determinand Determinand determinand name. nvarchar(100) 0
Casnumber CAS Number Chemical Abstract Service Number of the hazardous substance, as defined in the codelist. nvarchar(30) 0
DataSource Data source source of data: Eionet, ICES, MEDPOL. nvarchar(10) 0
Unit Unit unit of measurement. nvarchar(13) 0
GrainType Grain type sediment type description. M=mud, FS=fine sand, MS=middle sand, CS=coarse sand, S=sand, unspecified coarseness, G=gravel. nvarchar(15) 0
Fraction Fraction upper limit of particle size in analysed fraction in µm. nvarchar(6) 0
LimitOfDetectionFlag Limit of detection or determination flag flag to indicate sample below analytical limit of detection or determination in format <. nvarchar(4) 0
Sampler Sampler name of sampling equipment used. nvarchar(30) 0
Basis Basis basis of measurement. D=dry, L=lipid (fat), W=wet, X=unknown. nvarchar(1) 0
Files

Geographic coverage

Comments

European Environment Agency (EEA)
Kongens Nytorv 6
1050 Copenhagen K
Denmark
Phone: +45 3336 7100